Fairmont 2.0 (forged lq4, s480, 800whp, under new management)
#2089
TECH Apprentice
iTrader: (21)
Join Date: Dec 2005
Location: Mackinaw, IL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Crap O'Reilly crank position sensor. Mr. Goodwrench FTMFW. Chased that problem for nearly a week.
Turbo LSx Fairmont "Leroy Brown" Quick Update..... - YouTube
Turbo LSx Fairmont "Leroy Brown" Quick Update..... - YouTube
#2092
9 Second Club
iTrader: (1)
UPDATE:
After chasing a spark blowout/misfire/loss of syn issue, I swapped coils and all seems good. Car is very strong and very close to being dialed. Martin from Tick has been helping me out with the tune, and the John Bewley (Lil' John's Motorsports Solutions) cam and BW S480 is doing great. Next plan is to get the converter out and have it restalled to match the current powerplant. After that, I think it will be a good summer of racing in South Louisiana. I can't wait for the cool air to return in 5-6 months though. I hope to have it out to the track as soon as possible though.
Mike
After chasing a spark blowout/misfire/loss of syn issue, I swapped coils and all seems good. Car is very strong and very close to being dialed. Martin from Tick has been helping me out with the tune, and the John Bewley (Lil' John's Motorsports Solutions) cam and BW S480 is doing great. Next plan is to get the converter out and have it restalled to match the current powerplant. After that, I think it will be a good summer of racing in South Louisiana. I can't wait for the cool air to return in 5-6 months though. I hope to have it out to the track as soon as possible though.
Mike
#2094
9 Second Club
iTrader: (1)
Some updates. Clipped a coil in the rear springs to get it to sit evenly, Plasti-dipped my rear welds to match my powder coated fronts. Did a little more tweaking. Made some runs, the car is coming along nicely. Trans comes out this week because I need to re-stall the converter. Here are some pics of the changes and a short video of an in-car run. Sorry about the sound, my mic is taking a dump, I think.....
#2097
TECH Resident
Join Date: Oct 2009
Location: Michigan
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
So you're going to have it stall at a higher RPM? I think so, but with turbo setups sometimes it's a little difficult to tell what people are going to try next. Lol
#2098
Your going to need the better Weld rim/tire combo once the converter is stalled a little more so you can build 10psi. Im building a gen4 5.3 with a Lil John cam and S475 setup and going to need a converter too.