F1A-390ci-E85
#61
I just now ordered my aster bracket. I am getting really close guys. I can taste the rwhp. Here is a list of what is left before you see me fry my Nittos.
Fast 102mm + Nick Williams TB
Jakes 4l80e Level 5 + TransBrake (full swap kit included crossmember,harness etc,)
Circle D 258mm triple disc
Lonnies Twin 340's + Bosch 127lb injectors + Rails+ Lines
Tune
I am going to tune it on the 10 bolt. But will be getting the MWC before she hits the track in spring.
There is a GP on the aster bracket going on now. 10 of them for sale at a discount.
https://ls1tech.com/forums/sponsor-g...-purchase.html
Fast 102mm + Nick Williams TB
Jakes 4l80e Level 5 + TransBrake (full swap kit included crossmember,harness etc,)
Circle D 258mm triple disc
Lonnies Twin 340's + Bosch 127lb injectors + Rails+ Lines
Tune
I am going to tune it on the 10 bolt. But will be getting the MWC before she hits the track in spring.
There is a GP on the aster bracket going on now. 10 of them for sale at a discount.
https://ls1tech.com/forums/sponsor-g...-purchase.html
#63
thanks man I think so too! def not a twin 67mm 427 erl vette, but it will be my pride a joy DD and wax 99% of everything I come across on the road. To add to my news, I also received my ls2 water pump (crucial for making the new aster bracket fit) in today from Psychobillycaddy. It was actually in good shape and had no signs of leaking. To boot the thermostat was still in it too. I am still going to pop in a Hypertech 160*. I am also taking the A/C and all that **** out to save on weight. The decision was easy to make since I never use it, since the car is usually only out on weekends, and nights, and the top stays down. Read somewhere where it comes out to 80lbs in total. That should make up for the weight gained going with the LQ9.
#69
Hells Yeah. The temps here are just like anywhere, except it sounds like you already know how humid it is with moisture constantly being fed in from the Gulf of Mexico. I have an STS-V for those days and the ladies. All I need for the WS6 is a key and some toilet paper.
aww cmon....look at it as saving future money now. splurge. sell your old j bracket. collect copper, ***** yourself out to whomever.....just get it done no excuses
And to boot I am going to get money for it. i also have been looking into re locating that battery so it will put the weight where it counts.
I have done the math, and based on my rate of Income I will have this done shortly after tax time. Ready by spring to hopefully start chasing a high 5.xx with the F1-A on it.
PM sent.
PM sent.
Last edited by I8UR4RD; 09-16-2012 at 10:49 AM.
#70
dead bird
well. it will be wrapped up in over the coming months. took the liberty of making sure I captured the bird in its current state. its a sad thing to see it this way. which is why I hardly ever go by to see it. simply depressing, but motivating at the same time.
I happened to (strangely enough) work on a 2012 5.0 was dyno'd today with a 2300 tvs. it made 517/481 on 6lbs. stock everything.
we live in competitive times. cant wait for the new LS motors specs to come out. 5.5L making 4XX rwhp hopefully.
main thing I have been doing is gathering up parts and swapping the little things over that will give me a slight power increase. too bad im not ready in time for ls fest. not that a 9sec car is "all that" there, but it would have been nice to participate.
I have got a surprise in store tomorrow.
I happened to (strangely enough) work on a 2012 5.0 was dyno'd today with a 2300 tvs. it made 517/481 on 6lbs. stock everything.
we live in competitive times. cant wait for the new LS motors specs to come out. 5.5L making 4XX rwhp hopefully.
main thing I have been doing is gathering up parts and swapping the little things over that will give me a slight power increase. too bad im not ready in time for ls fest. not that a 9sec car is "all that" there, but it would have been nice to participate.
I have got a surprise in store tomorrow.
#74
Anyways, I did promise I had a small surprise in store. Nothing too special....I just did not want the 390 to starve on the D1
#75
11 Second Club
Join Date: Nov 2006
Location: saint louis Missouri
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
yeah when you've been chipping away at the project for almost a year without ever driving the car you wonder if it'll ever payoff. I know it will of course, but you cannot help but think it. The reason being, I am not skimping out on anything.....I have even decided to do the 1 & 7/8 headers with dual cutouts to get rid of my restrictive exhaust setup, because I refuse to take my exhaust off because the sound is by far my fav on any F-Body I have ever heard. I want to make sure I don't get it on the dyno, and feel I have 40-50rwhp loss because of my exhaust.
Anyways, I did promise I had a small surprise in store. Nothing too special....I just did not want the 390 to starve on the D1
Anyways, I did promise I had a small surprise in store. Nothing too special....I just did not want the 390 to starve on the D1
#76
TECH Regular
iTrader: (21)
Join Date: Apr 2005
Location: WISCONSIN
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
yeah when you've been chipping away at the project for almost a year without ever driving the car you wonder if it'll ever payoff. I know it will of course, but you cannot help but think it. The reason being, I am not skimping out on anything.....I have even decided to do the 1 & 7/8 headers with dual cutouts to get rid of my restrictive exhaust setup, because I refuse to take my exhaust off because the sound is by far my fav on any F-Body I have ever heard. I want to make sure I don't get it on the dyno, and feel I have 40-50rwhp loss because of my exhaust.
Anyways, I did promise I had a small surprise in store. Nothing too special....I just did not want the 390 to starve on the D1
Anyways, I did promise I had a small surprise in store. Nothing too special....I just did not want the 390 to starve on the D1