3 window

iTrader: (1)

Come on Nate, didn't think we'd catch that it was a gen1 header mockup? Lol!

LanceL

Race look!!!

LS1NOVA

iTrader: (12)

Going back to gen 1, I miss laying down the silicone across the valley and wedging the timing cover into the oil pan. I almost forgot how to offset
the rear main.

dmracing

iTrader: (80)

lol!!!!!!!!!!!!!

LS1NOVA

iTrader: (12)

I've been slacking on updates here but rest assured, the car is torn apart for upgrades again lol.

Smith frame, arms, manual rack, plates, etc.



Sneek peak at the wheel combo. Going old school on this one. The discontinued Mickey ET drag wheel (15x12) closey resembles a "slot". Picked up a set of 15x4 "Gyros" for the front. Magnesium style finish. Should go well with the green. I'll have it on the ground soon.

bigmandengo

iTrader: (21)

Nice subframe. How much weight will that shed?

94 slow

Nate,
Did you ever post a dyno graph of the new combo?

00duvall

iTrader: (7)

Are u going coil overs or springs? Keep us nova guys updated on how install goes.Thats got to free up some room for u plus the 150lbs savings.Are u staying ls? They said there plates were for sbc and bbc?

LanceL

Nate, what was the rim size and backspace in the front and back with the old drag wheels? The way the car sat was perfect!!

LS1NOVA

iTrader: (12)

Subframe and front suspension will save 150lbs. Taking another 100 off elsewhere.

I have not. I'll try to dig it up.

I'll be using the same Viking coilover conversion kit I did before. Kind of an in between a big spring and a coilover.

Rears were 15x10 with 7.5 bs. Can't remember the fronts. 4" I think.

garrysturbo

Nate ,
She's looking good & like the Smith Racecraft sub frame. Hey I don't want to bother u but , what BOV are u using & did u use 1 or 2 on ur TT set up. I have the Turbosmart Race Port BOV. I'm doing the C&R radiator w/ -20 an hoses.

LS1NOVA

iTrader: (12)

I have one 50mm bov.

garrysturbo

Ok , thank u.

LS1NOVA

iTrader: (12)

3 window

iTrader: (1)

Damn Nate, you don't waste any time! Looks good. Do you use Camaro spring pockets to raise the front spring mount?

spray280

iTrader: (5)

Looks great!! Magnesium really goes with the green.

garrysturbo

Now that's old skool

Guard dog

That stance!

E.rodz

iTrader: (4)

old wheels and tires going on the Falcon? i think the car would look better with the dog dish hub cap wheels.

LS1NOVA

iTrader: (12)

I do use the Camaro spring pockets.

Old wheels were sold. I strongly considered dog dish but the weight of steel kills it and aluminum was too spendy. This setup was waaay cheap and are really really light.