1999Firehawkls7

iTrader: (3)

Just like the title says....Need a website or a contact Phone number to get a reasonable price on good piping to use for intercooler pipes, Need to be able to get sticks in the 8ft on piece length range, Thx

allout06

iTrader: (11)

i use mandrel-bends.com (columbia river). decent prices. they rape you on shipping though

1999Firehawkls7

iTrader: (3)

Everyone seem to be doing that these days lol

allout06

iTrader: (11)

lol ya.. fuel is expensive

they seem to be the most consistent with their bends

1999Firehawkls7

iTrader: (3)

I dont need bends, Ill be doing that my self, just want a solid piece that long to eliminate welds and couplers to leak, doing a rear mount system so the piping al the way back up front to the intercooler will only have 4 couplers total per side on the Cold Side

ws602

iTrader: (2)

Race parts solutions the issue with 8 ft sections is shipping is going to be much I just purchased 5 4inch 90s and 3 2ft pieces of straight pipes for less than 300.00

bobbybennett23

iTrader: (1)

cx racing

allout06

iTrader: (11)

they have straights

1999Firehawkls7

iTrader: (3)

Im not positive on the length but just put it this way, as long as my rocker on my C5 car lol!!!!

boostnut

iTrader: (7)

UPS will kill ya on 8' sticks. Try your local muffler shops, that way you avoid the brown truck charges.

1999Firehawkls7

iTrader: (3)

^Good Call!

samdogmx

iTrader: (14)

yeah for straights hit up your local exhaust shop. I have gone in a few times & asked to buy their scraps for cash.

1999Firehawkls7

iTrader: (3)

aluminized exhaust pipe isnt what ya wanna use for Intercooler piping tho....or am I wrong?

Thought it was 6061 for intercooler pipe

samdogmx

iTrader: (14)

oh yeah. aluminum will probably be a lil harder to find local.

00Wildcat

Hyperperformance out of St. Louis area ftw tell Dan "Shane with the Crusty Nova sent you"!

snapc3

Cheapest aluminum tubing I have found:
http://www.globaltecheng.com/

95bowtie

I used aluminized mild steel on my rear mount without issue...was a little heavy maybe 25lbs but it's only one pipe figure can't hurt.

oscs

iTrader: (19)

409 ss 10ft piece from my local exhaust shop was $100

westtexasbuff

iTrader: (40)

cxracing. Bought it for my last project. Re-doing the cold side on my new car and bought from them again. Good quality and cheap.

mrstepheneades

Not done much searching but this is longest posted on ebay by cxracing. 2ft.


http://www.ebay.com/itm/Alum-Turbo-Intercooler-Intake-pipe-3-OD-Straight-24-L-/390563644178?pt=Motors_Car_Truck_Parts_Accessories&hash=item5aef684312&vxp=mtr