Finally My Inter Cooler problems might be solved..
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Finally My Inter Cooler problems might be solved.. Look what I found out by my door today
31x12x3
Looks like it will fit like a glove. I think I got my moneys worth, pretty big, bar and plate, 3inch in/outlets, polished very shiney
Smooth tanks, no sharp transitions going into or out of it. Excellent beautiful welds.
Now just have to wait for the SS bends and silicone hose to arrive
31x12x3
Looks like it will fit like a glove. I think I got my moneys worth, pretty big, bar and plate, 3inch in/outlets, polished very shineySmooth tanks, no sharp transitions going into or out of it. Excellent beautiful welds.
Now just have to wait for the SS bends and silicone hose to arrive
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Nobody is making a kit yet, I have it pretty much planned out how I am going to run the IC pipes from the s/c to the FMIC and from the FMIC to the TB. If all goes well I will have completed pics soon. I will then be able to post what I needed to get the job done, that will help others with the ATI kit to do the same.
J
J
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
So whatcha think Bos? Looks good, hope it gets the restriction demons excercised. Maybe more boost will show up on the gauge and the dyno printouts will read a lot better too I AM DONE now. Its all maintenance and fixing broke stuff from here on out. No more modding for me. I will update the rear when it breaks, and same goes for my 4L60E, but I will get a Cmotorsports 4L60E built to the hilt when that goes. But I am done. Time to enjoy the ol bird.
I AM DONE now. Its all maintenance and fixing broke stuff from here on out. No more modding for me. I will update the rear when it breaks, and same goes for my 4L60E, but I will get a Cmotorsports 4L60E built to the hilt when that goes. But I am done. Time to enjoy the ol bird. Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Thanks Will do, you know me. I will have a million pics posted of how I mounted it and ran the pipes, should have some pics by sunday of it mounted. Just waiting on the SS pipes and silicone....ordered those late
J
Will do, you know me. I will have a million pics posted of how I mounted it and ran the pipes, should have some pics by sunday of it mounted. Just waiting on the SS pipes and silicone....ordered those lateJ
i actually made and cardboard replica of my intercooler to figure the best way to have the endtanks and to my surprise it was way easier to have them on opposite side (more room)
later
Gary
later
Gary
Jer....... Pm me too...... all the info... Price? Was this the one me and you were looking at before? did you order hard piping to weld togeather or all silicone couplers?? Ill be ordering mine in about 8-10 days. Oh by the way..... my problem from before is solved..... its back in the car... time to go finish it up......
Kyle
Kyle
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Those who are interested in this IC PM's will be sent shortly- those that have sent me PM's you have replies
Kyle, Excellent I am glad your beast will be hitting the road soon
As for the SS 3 bends, I stumbled across an awesome deal on those too. I'll PM you later.
Mean LT1- what Dynedta said, definately more room than trying to force everything to the driverside or pass side. On the driverside my airfilter is in the fog light box and its a 5x12 conical filter so its hogging up quite a bit of space already, now figure in the 2 3inch pipes that need to go there too, no room. I am trying to route the pipes with few bends and as short as possible to keep things efficient.
Chris P, Yep I am still running the stock ATI twins until the rest of my stuff shows up But man this thing is nice, I can fit almost three of the small ATI twin cores with some left over on this thing
BlwnTA I just hope, my in the head visualization of how the pipes will be routed will work lol. I am sure it will. I will definetly have pics of everything.
Granite, Hi Brandon Thanks buddy
J
Kyle, Excellent I am glad your beast will be hitting the road soon
As for the SS 3 bends, I stumbled across an awesome deal on those too. I'll PM you later.Mean LT1- what Dynedta said, definately more room than trying to force everything to the driverside or pass side. On the driverside my airfilter is in the fog light box and its a 5x12 conical filter so its hogging up quite a bit of space already, now figure in the 2 3inch pipes that need to go there too, no room. I am trying to route the pipes with few bends and as short as possible to keep things efficient.
Chris P, Yep I am still running the stock ATI twins until the rest of my stuff shows up
But man this thing is nice, I can fit almost three of the small ATI twin cores with some left over on this thingBlwnTA I just hope, my in the head visualization of how the pipes will be routed will work lol. I am sure it will. I will definetly have pics of everything.
Granite, Hi Brandon Thanks buddy
J