Project GatTagO

iTrader: (7)

About time. If you need assistance with the tuning, keep me in mind.

Andrew

Tommy42088

lol, I guess we live and learn, and thanks man. I'll post the tune and dyno numbers when I get it back and see what you guys think

Tommy42088

Just waiting on the integrated harness, ordered it from current performance. They seem to have good reviews and my tuner uses them as well. Hopefully shipment time isn't to far out. I think it's build to order tho so it may take a little time.

Tommy42088

Do you guys know if anyone else makes the integrated harnesses and keeps it in stock? My estimated shipment date is 7/1/24 , that seems a bit long on. I ordered it 4/22/24

Quito195

I don’t have a referral, but I will vouch that CPW is worth the wait. Always been very happy with their stuff even with lead time.

Tommy42088

yeh that's what my tuner is telling me too, just makes me nervous letting my truck sit like that with e85 in the tank. It already sat a little while when I had to put a transmission in it.

The BallSS

iTrader: (9)

Toss a jug of Sta-Bil fuel additive in while its in storage?

Tommy42088

ah ok, I'll definitely do that. Should I be concerned with the injectors?

The BallSS

iTrader: (9)

I'm not super familiar with E85 and its life span while stored but if the truck doesn't run, maybe pull out the injectors and have an injector shop just run them to get the fuel out.
If they get gummy they'll cause other issues and then you'll have to get them cleaned.
Hopefully someone with more experience will chime in.

GMCGreg

They make a marine version too, specifically says it's made to deal with the ethanol , don't know how good it works but it may help

Tommy42088

yeh that was my concern, It sat almost 2 months with the transmission, I did crank it a few times but couldn't run out the fuel as it wasn't driveable and now I have to wait until 7/1/24 to even get the integrated harness much less get it put together. Probably closer to August if im being realistic

Tommy42088

I'll definitely check that out, appreciate the help

GMCGreg

Is the truck running now ? Hopefully it is cause you'll want to run it after adding stabilizer or else it won't get to the pump , filter and injectors unless you run it

Tommy42088

Ill have to check with my tuner, I believe he put the original ecu back in it so he could put it inside his shop, if so then yes

The BallSS

iTrader: (9)

There you go, toss some Sta-Bil in it, shake the bed really good and let it idle for a while.

Tommy42088

Current Performance sent me a tracking number this morning, looks like I'll be receiving the integrated harness much sooner then the projected July date! Can't wait, ready for this thing to be complete

Tommy42088

Update, were running on holley!! Should get it on the dyno tomorrow, we had a rain today and had to move some wiring around on the second fuel pump because it wasn't wanting to come on but we're getting close.

Tommy42088

15 psi, 95% duty cycle on e85, i guess the 2 aeromotive 340's and the FIC 80's are maxed out

TrendSetter

whats the combo

Tommy42088

gen 3 sbe 5.3, 243 heads port polished & milled 40 thousands, btr stage 3 truck cam with dual 660 springs. Vsr 78/75 billet g 2.5 series with 1.25 ar, sheet metal intake with 102mm throttle body, Frank built my 4l60e, circle d 258mm 3800 converter, 342 gears with mini spool, dual aeromotive 340 pumps with fic 80lb injectors and we just put holley terminator x max.
this is the same single cab truck you guys had been giving me advice on.