ProCharger Question
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
ProCharger Question I am looking at this kit to buy for my T/A. It needs a few things to be 100% complete. I understood all the parts except one thing. Seller says it needs an "intake hat for the blower or a 3.75" elbow"... So is that like just the bent rubber hose that goes out of the blower and into the filter? Where can I get that? Any idea of cost? Thanks for any help guys! Can't wait to get back on the FI boat 
yes sir, that is what it is. What style are you getting though?? Every model has different inlet sizes. I would say look on ebay, but search here and you will find a link that goes to a site that sells them pretty cheap.
You can call ATI directly and get the part from them, so some of the sponsors can get it for you. A regular 90 degree bend wont work because the turn is so sharp it will crush the fitting and hit the radiator shroud. I costs like $125 from ATI I think.
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Holy crap! $125 for a piece of plastic! 
Please tell me there is a cheaper alternative! The seller said they were using dryer hose. Not sure I want to go that route tho...
Please tell me there is a cheaper alternative! The seller said they were using dryer hose. Not sure I want to go that route tho... http://shop.airflowonline.com/Mercha...egory_Code=CE2
that is what they were talking about on the other thread.
Hope this helps
that is what they were talking about on the other thread.
Hope this helps
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Originally Posted by dans91
http://shop.airflowonline.com/Mercha...egory_Code=CE2
that is what they were talking about on the other thread.
Hope this helps
that is what they were talking about on the other thread.
Hope this helps
Trending Topics
sorry, forgot to add that in LOL
I guess from reading the new stuff it does not work so DONT use that site i sent yah, but here is the thread, it is right below yours LOL
https://ls1tech.com/forums/forced-induction/281226-procharger-f-1-help.html It is for a F1 but it gives the basic idea. you should just use one of the filiters like the one HKS had and be good with it
I guess from reading the new stuff it does not work so DONT use that site i sent yah, but here is the thread, it is right below yours LOL
https://ls1tech.com/forums/forced-induction/281226-procharger-f-1-help.html It is for a F1 but it gives the basic idea. you should just use one of the filiters like the one HKS had and be good with it
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I have an inlet hat for a p1sc you can have for $65 + shipping...I also have the twin IC's (for f-body) and most of the IC plumbing & clamps for $399+ shipping..pm me if interested
