Finally went 9's with vid
#1
On The Tree
Thread Starter
Join Date: Jan 2004
Location: layton ut
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Finally went 9's with vid
I finally got everything working went to the track for the first time with the bs3.
Vid: http://media.putfile.com/chad86
60 ft 1.57
1/8 mi 115.7mph
1/4 mile 130 mph
1/4 mile 9.97
I had to lift right around the thousand foot mark because the wastegate line blew off the back of the intake and boost started to climb fast. I think there is quite a bit more in it but they kicked me off the track so i guess i have to go get licensed etc. This was on 17-18 pounds of boost and still on stock 99 heads, only thing upgraded is the springs. Da that night was 7200 ft im going to try to make it down to a sea level track here soon to see what it will do there. Raceweight is 3900 pounds.
Vid: http://media.putfile.com/chad86
60 ft 1.57
1/8 mi 115.7mph
1/4 mile 130 mph
1/4 mile 9.97
I had to lift right around the thousand foot mark because the wastegate line blew off the back of the intake and boost started to climb fast. I think there is quite a bit more in it but they kicked me off the track so i guess i have to go get licensed etc. This was on 17-18 pounds of boost and still on stock 99 heads, only thing upgraded is the springs. Da that night was 7200 ft im going to try to make it down to a sea level track here soon to see what it will do there. Raceweight is 3900 pounds.
Trending Topics
#8
On The Tree
Thread Starter
Join Date: Jan 2004
Location: layton ut
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Diamond pistons, pro mod rods, thats about it still stock mains and bolts, yes it is a th400 the six speed didnt like the power to much so i switched over a couple months ago.
#16
On The Tree
Thread Starter
Join Date: Jan 2004
Location: layton ut
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Moser 9", qa1 shocks, spohn tq arm and lca's both rod ended, airbag in right rear and stock springs, mt 28 1050w et drags, ya its pretty squirly down the track dont know if its jus tthe track prep here or not i guess well find out when i go to another track here next month. To go nines legally you need a certified chassis, 10 point cage, sfi dampner and flexplate, flexplate shield, trans shield, nhra competition licence, full firesuit, chute at 150, master electrical shutoff etc, im shure theres a few more i forgot but those are all the ones i currently have to do.
#17
TECH Senior Member
iTrader: (21)
Originally Posted by 69firebird
what all do you have to buy kyle??
ed
ed
battery kill switch, SFI approved Harmonic balancer, SFI approved bellhousing, 10 point cage, window net, neck brace, fire gloves, shoes, double layer fire jacket...(makes old one no good) fire pants, different rating helmet, SFI approved flexplate, flexplate shield, Tranny shield, aftermarket axles...... and thats off the top of my head. .... ill go look at my list
I dont want any problems..... oh i almost forgot..... NHRA license, IHRA license if you race at those tracks and a certifacation for the chasis....... its a big spendy list......
Kyle
#18
TECH Addict
iTrader: (14)
Join Date: Nov 2002
Location: hurst tx
Posts: 2,560
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NA$TY-TA
battery kill switch, SFI approved Harmonic balancer, SFI approved bellhousing, 10 point cage, window net, neck brace, fire gloves, shoes, double layer fire jacket...(makes old one no good) fire pants, different rating helmet, SFI approved flexplate, flexplate shield, Tranny shield, aftermarket axles...... and thats off the top of my head. .... ill go look at my list
I dont want any problems..... oh i almost forgot..... NHRA license, IHRA license if you race at those tracks and a certifacation for the chasis....... its a big spendy list......
Kyle
I dont want any problems..... oh i almost forgot..... NHRA license, IHRA license if you race at those tracks and a certifacation for the chasis....... its a big spendy list......
Kyle
just dont want to keep spending, the bleeding has to stop somewhere.
ed
#19
TECH Senior Member
iTrader: (21)
Originally Posted by 69firebird
well I guess Im no longer shooting for 9's then
just dont want to keep spending, the bleeding has to stop somewhere.
ed
just dont want to keep spending, the bleeding has to stop somewhere.
ed
Its big $$ man.....
The cheaper Fire gear is .. ill break it down on what i have left.....
Jacket $151
Pants $151
Shoes $72
Gloves $63
Neck brace $30
Helmet $250
Sfi Balancer ATI is the only one for us $470
Flex plate $200
Plexplate shield $50
Bell housing With tranny... inc
trans shield $90
Chasis cert About $130
10 point chromoly cage $2k
License's cheap plus a fisical for NHRA
Axlea re covered in the new rearend....
Itll end some day....
way off track here but good info to know.....
Congrats again on the times and awsome setup.
Kyle