New Twin Turbo system pics
#161
TECH Regular
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by INTMD8
Thanks everyone. I've been working on this for some time, and I rebuilt many of the parts 2 or 3 times until I was completely satisfied with the fit and design.
ABeasst- If T4's would fit in that location I wouldn't be able to do it without removing the starter or notching the frame. These GT35's are a very tight fit. I believe lingenfelter uses the GT35R's on their 427's, and possibly Hennesseys vipers, but I wouldn't personally use them on anything much larger than 370ci, and ideally stock displacement.
Classic- There will be a steel brace from the header flange to the turbine inlet flange for support. (as there is on my LT1 car)
ABeasst- If T4's would fit in that location I wouldn't be able to do it without removing the starter or notching the frame. These GT35's are a very tight fit. I believe lingenfelter uses the GT35R's on their 427's, and possibly Hennesseys vipers, but I wouldn't personally use them on anything much larger than 370ci, and ideally stock displacement.
Classic- There will be a steel brace from the header flange to the turbine inlet flange for support. (as there is on my LT1 car)
Why do you think that lingenfelter uses them on a 427 ? Can they get away with it because of duel exhaust ?
Awsome kit by the way !!!
#162
Coal Mining Director
iTrader: (17)
Join Date: Nov 2001
Location: Virginia
Posts: 4,442
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by wildta
Is there a difference between a gt35 and a gt35R ?
Why do you think that lingenfelter uses them on a 427 ? Can they get away with it because of duel exhaust ?
Awsome kit by the way !!!
Why do you think that lingenfelter uses them on a 427 ? Can they get away with it because of duel exhaust ?
Awsome kit by the way !!!
#163
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by wildta
Is there a difference between a gt35 and a gt35R ?
Why do you think that lingenfelter uses them on a 427 ? Can they get away with it because of duel exhaust ?
Awsome kit by the way !!!
Why do you think that lingenfelter uses them on a 427 ? Can they get away with it because of duel exhaust ?
Awsome kit by the way !!!
#167
TECH Enthusiast
iTrader: (7)
Join Date: Mar 2006
Location: Louisiana
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#169
FormerVendor
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well, all of our materials did not ship out until yesterday (being sent to us by truck freight as it's a larger order).
With any luck we should have it all next week.
We did do a bit of work to get the car ready. Going to run it on the stock shortblock initially and today we installed unported 6.0 truck heads, 01 Zo6 cam, 918 springs, MLS gaskets with ARP studs and also an LS7 Clutch.
With any luck we should have it all next week.
We did do a bit of work to get the car ready. Going to run it on the stock shortblock initially and today we installed unported 6.0 truck heads, 01 Zo6 cam, 918 springs, MLS gaskets with ARP studs and also an LS7 Clutch.
#171
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by INTMD8
Well, all of our materials did not ship out until yesterday (being sent to us by truck freight as it's a larger order).
With any luck we should have it all next week.
We did do a bit of work to get the car ready. Going to run it on the stock shortblock initially and today we installed unported 6.0 truck heads, 01 Zo6 cam, 918 springs, MLS gaskets with ARP studs and also an LS7 Clutch.
With any luck we should have it all next week.
We did do a bit of work to get the car ready. Going to run it on the stock shortblock initially and today we installed unported 6.0 truck heads, 01 Zo6 cam, 918 springs, MLS gaskets with ARP studs and also an LS7 Clutch.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#173
TECH Junkie
iTrader: (1)
Join Date: Sep 2002
Location: Conroe, TX
Posts: 3,080
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by JMBLOWNWS6
Show me some pics of the finished weld on the kit. Please. Im like a fish on a hook that you keep throwing back ![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Gotta love the continious progress reports Jim! Keep up the great work on keeping us informed on this setup. Some Speed Inc video wouldnt hurt of some of the shake downs
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#177
OWN3D BY MY PROF!
iTrader: (176)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by FANTAZ28
spoke with im yesterday , and they have started to make the first production kit using the jigs... he said everything is coming out great! i belive they will have a kit ready VERY soon.