power from stock cubes
#1
10 Second Club
Thread Starter
iTrader: (10)
Join Date: Jun 2005
Location: cape cod mass
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
power from stock cubes
so what are u guys making for power on a forged 346ci..preferbly on pump gas. i got a good deal coming up this summer on one i'll be using my 6.0 heads to start and for the cam..not sure yet. but hoping for around 650-700whp if the T70 can make it
#3
TECH Regular
iTrader: (5)
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
I agree, plenty of guys making lots of power on the stock 346...
That's the way i'm going - keeping my 5.3 heads (since there a good amount of port&polish work) and going with a -16cc dish Mahle (3.908 bore) forged piston to bring the CR down to 9.0:1 (w/ .060 head gasket)... stock crank, eagle forged rods, and Twin T44's... project will be done by the time the snow melts...
I'm expecting 650-700 whp... street only monster
That's the way i'm going - keeping my 5.3 heads (since there a good amount of port&polish work) and going with a -16cc dish Mahle (3.908 bore) forged piston to bring the CR down to 9.0:1 (w/ .060 head gasket)... stock crank, eagle forged rods, and Twin T44's... project will be done by the time the snow melts...
I'm expecting 650-700 whp... street only monster
#4
10 Second Club
Thread Starter
iTrader: (10)
Join Date: Jun 2005
Location: cape cod mass
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
my set up is like the tti street kit now and prob kep i with the forged motor..need the money for a rear end and some more tranny work. thinking of the ingenfelter cam orsomeother kind of custom grind. this motor made 650+ in a vett with with a procharger
Trending Topics
#9
TECH Fanatic
iTrader: (8)
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 52172
Who and was it with twins maybe? I would like to know the combo. I have never heard of it. What kind of compression are they using? Super low or what? Anyway there is no way he will make it to 700 with a single T70. If he does he's very lucky and needs an M6 for sure.
#12
TECH Junkie
iTrader: (2)
Well then right on it can be done with lots and lots of turbo and very low compresson I am sure. Would be best for racing the 1/4 not the street. I am shootin for 650 rwhp with my setup and an M6 on 91 octane no meth just my good old intercooler rated to 1100hp. I think I can make it even with a safe tune.
#13
LS1Tech Co-Founder
iTrader: (34)
I think 650-700rwhp thru an M6 is achievable with 346ci and pump gas, no meth, but that's where most folks would be battling high IAT's and also having to put their timing really low.
#14
10 Second Club
Thread Starter
iTrader: (10)
Join Date: Jun 2005
Location: cape cod mass
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tiago
more then a hand full of people have made 800-900 rwhp on 93 octane with no meth.
even on a 346
even on a 346
#15
TECH Junkie
iTrader: (2)
I will land somewhere in that window hopefully the intercooler upgrade Marko gave out will help make the power on 91octane. I will be posting in the next few weeks my dyno sheet and the amount of boost we were able to push along with timing and all that. We will see what this STREET KILLER can do with 91 and a TC76MPS.
#18
TECH Fanatic
iTrader: (8)
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 52172
I will land somewhere in that window hopefully the intercooler upgrade Marko gave out will help make the power on 91octane. I will be posting in the next few weeks my dyno sheet and the amount of boost we were able to push along with timing and all that. We will see what this STREET KILLER can do with 91 and a TC76MPS.