Bloodbath

ive got a nos plate under a 4 barrel edelbrock throttle body and vic jr manifold, i was looking at tapping 2 water meth nozzles into it, anyone done this, i could run another plate on top of this but would run into height issues. anyone done this or can show me pics/vids of this done? any suggestions..




bloodbath!

RsSean

iTrader: (27)

You can get a 2 stage plate and run your meth in the 2nd bar. Instead of drilling and tapping that plate.

Would recc. seeing how the meth come out of the spray bar. Grant is a liquid but nitrous is at a higher pressure

AgFormula02

iTrader: (13)

Can you not tap the intake?

chuntington101

Be interested to see the results! Always thought that spraying using a plate, ie lots of very small nozzels, would lead to better absorption on the heat in the intake......

Bloodbath

i can, but id rather not. is rather have it come in above the nitrous, or with the nitrous! only issue with the plate would be spray pattern?

Bloodbath

thats the plan. doesnt seam like too many people have done it though.

99JT

Snow makes a 6 nozzle plate for the Holley hi ram intake but I haven't seen anything running it yet.

https://www.nitrousexpress.com/hi-ra...tion-plate.asp

G Atsma

You're quoting a post from 13 years ago. Things change with time. Plus, OP hasn't been here in ages....