CARFREAKS

iTrader: (14)

Hey guys I'm looking for a rear end. I'm wondering who you would recommend and what gearing and what will be must haves for this custom rear end.

I'm going to be making 750+whp in my 94 z28 "Its Lowered" Full Global west suspension.. built 4l60E my turbo can go up to 1,400hp "room to let the boost bug move in!"

My main goals are to be able to hit 200+ mph and be able to run 9's at the track it will only see the track 2-3 times a year. It will be raced on the street every weekend! I would like to get a rear end that drives good and smooth with corners It will see the road course. It would be nice to have some form of LSD I was looking at A TRU TRACK but I dont think it will hold the HP I just seen the pictures of the busted Wavetrac what do I do? 12in or ford 9" 35spline? gear ratios 3.08?

I'm hope a sponsor can jump in here and hook me up on a great price and answer some questions for me as well! So that I can buy with confidence. Build it once right!

6spdchevy

iTrader: (2)

bump & subscribed im interested

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/Moser-M9-...y-Complete.htm

Take a look at the above link, and I would option it with the Wavetrac and the PST driveshaft.

Here is a video link on the M9. http://www.powertvonline.com/video_detail.php?mId=2901

Let me know if you have any questions. Bob

trik396

iTrader: (4)

Just my opinion but I feel the S60 is superior to a 9inch. Everything is bigger including ring gear. It might weigh a little more but that weight means strength. Plus it's much less expensive. Not cheap but much better bang for the buck. JMHO.

Gaunt

iTrader: (11)

S60 doesn't support the Wavetrac I don't think.

9 inch does.

MidwestChassis

iTrader: (5)

From what it sounds like I would suggest the Wavetrac in one of our rear ends with the addition of a watts link. You can build a housing that will suit your needs of wanting to be able to hit the strip plus take some spirited corners.

If you have any questions hit me up with a PM or call and we can get you set up with something. Our housings come with a chrome-moly torque arm and cross member of your choice, either long or short version. The short version comes with a drive shaft loop built in.

Other standard features of our housing are drain plug, four hole relocator style lca brackets, stock style anti-sway bar mounts, brake line clips, hose mounts, and e-brake cable brackets(98-02).

Bob@BruteSpeed

iTrader: (16)

Correct, and the Moser M9 with it's chromoly torque arm and transmission crossmember is the same weight as the 10 bolt. My Camaro cut 1.29 60 ft times with this rear on M/T DOT drag radials. Bob

CARFREAKS

iTrader: (14)

I like the m9 but dang with out brakes Its over $4,000 and no added suspension just rear end and gears... also can I a get a 3.08 or something less then a 3.25?
I'm fine with spending $2,000 + on a rear end but not $4,000+...

SS4Luck

iTrader: (10)

it jsut the cost to play man, i doubt your going to find the rear end you want to support your HP levels for less. Especially if your looking for suspension and brakes too.

Carl at CRP

iTrader: (9)

Carfreaks,
Here is a link to the S60 bolt in rear for the F-body by Strange Eng. There are some up-grades listed but others You might be interested in that we can discuss if this is what You like.

http://centralracingparts.com/index....product_id=229

The parts line is 316-299-8427 and I have it forwarded to my cell this weekend like usual, call if You would like to discuss this.
Thank You,
Carl Loder

CARFREAKS

iTrader: (14)

I already have suspension... I just need a complete rear end... Brakes would be nice but not a must I have a Member of my car club that works for Brembo....

Bob@BruteSpeed

iTrader: (16)

Do you already have a good torque arm? If you do, the standard Moser 9 inch is a good way to go, and it is a lot less money. http://shop.brutespeed.com/Moser-9-I...c-Truetrac.htm Bob

CARFREAKS

iTrader: (14)

Can you get the standard 9 inch with the new wavetrac?

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/Moser-9-I...h-Wavetrac.htm

Yes you can, above is the link to it. Bob

CARFREAKS

iTrader: (14)

I have the Global West track link bar. http://www.globalwest.net/tsc-26.html par hard rods upper and lower tubular arms. Fully adjustable coil overs...

Can you put the new and improved...Wavetrac in the standard 9?

Bob@BruteSpeed

iTrader: (16)

Yes indeed, the above link I posted is to it. Bob

CARFREAKS

iTrader: (14)

Hey bob can you PM me or call me to go over all the details to make sure I'm not missing anything.. like I said build it one right. and to find out if your willing to cut me a deal on pricing... Respectfully Champ 616 648 4212

Bob@BruteSpeed

iTrader: (16)

Thanks, I pm'd you last night. Bob

Carl at CRP

iTrader: (9)

Here is a link to Central Racing Parts first special in the sales/specials section.

https://ls1tech.com/forums/sponsor-s...60-f-body.html

Hope this helps some of You needing a new rear end for Your car!

Thank You
Carl Loder

CARFREAKS

iTrader: (14)

I'm heariung 2 different things some people say the s60 is more efficent others say the 9inch is how do anyone else have any input? I like the idea of a wavetrac but I like the cost of a s60!