onfire

iTrader: (17)

Hotter than heck yesterday...but time to throw some power at the M9.

http://www.streetfire.net/video/hawk...ol_2262336.htm

Bob@BruteSpeed

iTrader: (16)

Looked good Tom! Good ole Thunder Valley, I raced there back in the late 70's at the Bracket Nationals. Bob

MidwestChassis

iTrader: (5)

Great pass, what was the suspension under your car again and how much power does the car make?

onfire

iTrader: (17)

Yesterday wasn't a good day to test anything due to the heat. Track temp was 134F when I started and got hotter. I could not get the radials to hook at all. Bolted on a set of MT28 10.5's just to get a couple of "manly" passes...lol...

Car weighs +3800lbs with the AC, full interior,all power options, etc,etc still in it. Too heavy....

Makes whatever hp I punch into the controller

Moser M9, Moser LCA's, Moser PHB. All great stuff.

Madman custom AFCO's doubles front and back, Strange Pro 2's up front, stock rear brakes with EB, limiters. Great stuff.

BMR 1" lowering springs in the back...jury still out on these...

Yesterday I installed a MWC ARB to test. Took a Spohn ARB off (and still have it). I was impressed with the MWC ARB...dropped 14lbs of weight and it responded very well to small preload changes at the track.

Have to make more changes to get my AS back...might go back to stock rear springs with the hose mod.

onfire

iTrader: (17)

Finally checked the logs today. Driveshaft rpm was up 700 at 1 second into the run over normal....134F track is tricky.....

Zmg00camaross

iTrader: (11)

What computer do you use?

onfire

iTrader: (17)

To keep the AC, factory gages, etc...I use 2 computers. Factory ecm and BS3....another reason why the car scales 3874lbs with me in it...lol..

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/Moser-M9-...y-Complete.htm

Pictures of onfires rear can be found at the above link. Bob

MidwestChassis

iTrader: (5)

onfire sounds like a great combo, also glad the MWC anti roll bar worked out for you as well.

onfire

iTrader: (17)

The MWC bar is a nice piece. I was getting 4" of cross lift with the Spohn bar and am down to 2" with yours..couple more hits and it will be zero. Dropping 14lbs was a bonus.

Zmg00camaross

iTrader: (11)

It is a lite piece

Bob@BruteSpeed

iTrader: (16)

Tom, anymore updates? Bob

onfire

iTrader: (17)

I'm going to let the weather cool of a little bit...90's and a fire jacket don't mix!

Bob@BruteSpeed

iTrader: (16)

Hopefully the hot weather breaks for you, we had a cool down here earlier this week. Bob

ponjohn

What rear were you running before?

onfire

iTrader: (17)

A different Fab9. It did a great job.