pacdwal02

Like it says in the sig, what would you do next from the mods in the sig? Rear end, new cam, clutch? What would you do?

joker machine

heads,bigger cam

Detoxx03

iTrader: (14)

Heads/Intake/Tune

pacdwal02

I've been thinking about heads, just not sure what I wanna do..I would like to keep driveability, so what cam and heads would you consider, and I know a FAST should be next followed by another tune (got it lifetime). What have you done, or give some details about what I should do.

johnLs1camaro

iTrader: (28)

man rearend all the way... your gonna need it with a m6, and get a good gear, then a bottle!

but for real rearend should be number one, your gonna have power and nothing to push it anywhere!

pacdwal02

i gotcha, a 9" is what i plan on, 3.73 is what i think i'll do as far as gears for now, guess i should od sais that...every post helps cause i think to myself..'forgot to say that's what needs to be done', ...moser or 9"?

pacdwal02

i gotcha, a 9" is what i plan on, 3.73 is what i think i'll do as far as gears for now, guess i should of said that...every post helps cause i think to myself..'that's what needs to be done', ...moser or 9"?

johnLs1camaro

iTrader: (28)

do you mean moser 9inch or moser 12bolt? if so 9 inch all the way! good pick though you wont be upset with it!

FiFdYnUtz

iTrader: (12)

nice #'s with that setup!

zracer323

iTrader: (12)

I would do the rear end first. Nothing like a little piece of mind. I would personally go with some 4.11's since your an M6

cbonjour

i agree with the 4.11's if its an m6. but i'd say heads and a fast intake should be next, as long as your rearend will hold up

Swift_01_z-28

iTrader: (1)

New rearend man. First and foremost. All that power through your stock 10 bolt, your bound to break something.

pacdwal02

That's what I'll do, should have the rear end before summer...there goes my tax return

Swift_01_z-28

iTrader: (1)

Good choice man, I bet you won't be dissapointed. Did you decide what gears yet? I am with the others on the 4.11's for the m6.

01SuperSport

iTrader: (7)

Bigger cam and gears I'm sure the rearend can wait. I highly doubt you race all the time. Your rear should be fine in the mean time.

01ssreda4

iTrader: (96)

i vote clutch, the stockers cant take much...

Camaro_94

iTrader: (5)

Either rear end and some tires.

pacdwal02

Forgot about the tires, I have nitto Nt555, 275/50ZR17 in front, 315/40ZR17 in back

Daryn

iTrader: (19)

dart 225's or afr 225's and a fast intake. then get a 12 bolt

MonmouthCtyLS7

iTrader: (6)

x2