Automatic headlights!!!
#1
Automatic headlights!!!
I have owned 2 2002 Camaro SS's. The first one didn't have and the current one does have automatic headlights, I hate this when i'm at a drive-thru somewhere. The worst part is the amount of work it requires to turn them from automatic to manual. The only difference between the one I had and the one I have is my current one has ASR, my other one didn't. Why would they make some automatic and others not?
#2
On The Tree
Join Date: Jun 2005
Location: Left Coast, USA
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
I didn't know they came without auto headlights, mine has asr also.
But when you are at the drive-thru just pull the brake handle up a click. That should kill the lights.
At least mine come on and go off with the brake handle. I don't think I've ever turned the lights on manually.
But when you are at the drive-thru just pull the brake handle up a click. That should kill the lights.
At least mine come on and go off with the brake handle. I don't think I've ever turned the lights on manually.
#5
Originally Posted by bww3588
all 1993-2002 F-bodies were made in Canada. and all the Camaro's had AHL's, Trans Am's/Firebirds didnt. someone must have disabled yours before you got it.
Trending Topics
#14
Copy & Paste Moderator
Here is the sticky on disabling auto headlights:
(Its much easier than the write-up LS1>girlfriend followed)
https://ls1tech.com/forums/showpost....61&postcount=8
Firebird's sold in Canada also had auto headlights.
(Its much easier than the write-up LS1>girlfriend followed)
https://ls1tech.com/forums/showpost....61&postcount=8
Firebird's sold in Canada also had auto headlights.
#15
TECH Addict
iTrader: (1)
Join Date: May 2007
Location: NY
Posts: 2,516
Likes: 0
Received 0 Likes
on
0 Posts
Yes, any vehicle made in Canada has automatic headlights. Here is an even easier way to disable them.
1. Take the bezel and vent off the drivers side vent above the light switch.
2. Remove the 2 screws holding in the light switch
3. Find the orange wire going to terminal G and cut it. You may want to cut it a little bit back from the terminal in case you want to hook it back up later and also wrap some tape around the end of the hot wire so it doesn't come into contact with anything.
**Your marker lights will still come on automatically but the fogs and headlights will be full manual
1. Take the bezel and vent off the drivers side vent above the light switch.
2. Remove the 2 screws holding in the light switch
3. Find the orange wire going to terminal G and cut it. You may want to cut it a little bit back from the terminal in case you want to hook it back up later and also wrap some tape around the end of the hot wire so it doesn't come into contact with anything.
**Your marker lights will still come on automatically but the fogs and headlights will be full manual
#17
12 Second Club
iTrader: (49)
everyone has a Canadian built F-body, ALL Camaro's have AHL's, ALL Firebirds/Trans Am's built for sale in the US do NOT have AHL's, all Firebirds/Trans Am's built forsale in Canada DO have AHL's. once again, if you have a Camaro, it doesnt matter if your car was built forsale in outerspace, your car has AHL's.
#19
TECH Addict
iTrader: (75)
Join Date: Aug 2005
Location: South Jersey (15 miles from Atlantic City)
Posts: 2,167
Likes: 0
Received 1 Like
on
1 Post
Just popped the dash and stuck a resistor (5ohm I think?) 55 cents from Radio shack. I did it on all 3 of my LS1 cars and my Current SS that was my 1st mod. Never had a problem
#20
TECH Enthusiast
iTrader: (9)
Join Date: Sep 2006
Location: lincoln
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by waldershrek
Yes, any vehicle made in Canada has automatic headlights. Here is an even easier way to disable them.
1. Take the bezel and vent off the drivers side vent above the light switch.
2. Remove the 2 screws holding in the light switch
3. Find the orange wire going to terminal G and cut it. You may want to cut it a little bit back from the terminal in case you want to hook it back up later and also wrap some tape around the end of the hot wire so it doesn't come into contact with anything.
**Your marker lights will still come on automatically but the fogs and headlights will be full manual
1. Take the bezel and vent off the drivers side vent above the light switch.
2. Remove the 2 screws holding in the light switch
3. Find the orange wire going to terminal G and cut it. You may want to cut it a little bit back from the terminal in case you want to hook it back up later and also wrap some tape around the end of the hot wire so it doesn't come into contact with anything.
**Your marker lights will still come on automatically but the fogs and headlights will be full manual