My new Build Bunch of PICS
02-26-2008, 08:59 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (17)
Join Date: Dec 2005
Location: charleston wv
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
My new Build Bunch of PICS *****UPDATED NEW PICS AND VIDEOS ON PAGE 2,3***3-25-09****
383
JE pistons
Eagel Rods
Eagel crank
Dart Pro1 heads 225 runners 2.05/1.60 milled .20
Stock rockers
Comp 981 springs
Texas Giant Cam 248/254 613/622 114 LSA
FAST 90 intake
90mm UMI tb
MTI clear lid
Pacesetter no air or egr
Pacesetter off road Y
MSD wires
160 Hypertech stat
TSP custom tune
My goal would be 450-500 rwhp <~ reasonable ??? If not juice here I come
383
JE pistons
Eagel Rods
Eagel crank
Dart Pro1 heads 225 runners 2.05/1.60 milled .20
Stock rockers
Comp 981 springs
Texas Giant Cam 248/254 613/622 114 LSA
FAST 90 intake
90mm UMI tb
MTI clear lid
Pacesetter no air or egr
Pacesetter off road Y
MSD wires
160 Hypertech stat
TSP custom tune
My goal would be 450-500 rwhp <~ reasonable ??? If not juice here I come
Last edited by crzytown69; 09-02-2009 at 06:46 AM.
02-27-2008, 07:19 AM
#7
TECH Enthusiast
Thread Starter
iTrader: (17)
Join Date: Dec 2005
Location: charleston wv
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Well you see what happened was some little elf came and stole my money and im stuck with a stock A4 and 3:73 richmond gears ... I think im going to do sfc, lca's, panhard bar, torque arm and tubular tranny mount with the safety loop built in. then it will be a race agiant time to get a ford 9inch and a built 4l60 and a stall in there...
I am gonna take a start up video gotta have a video of my baby coming to life
I am gonna take a start up video gotta have a video of my baby coming to life
Trending Topics
**** yeah! 
02-29-2008, 08:51 AM
#16
12 Second Club
iTrader: (5)
Join Date: Jan 2007
Location: St. Louis, Missouri
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Usually.. M6 cars go the 9in because their stronger.. if your stall isnt too high youd be fine with a 12 bolt.
