My catch can routing ok?
#142
TECH Addict
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very interesting thread. I have a few questions, if thats alright? One is, will the clean side always be the passenger side/dirty side drivers side due to rotation of engine, or is it reversable. Also, I'm running a RevXtreme catch can, and it blocks off the front port on the clean side, but then what is the rear still used for? If the front is closed off, where is it going to pull for the clean side? (ls1)
#144
TECH Addict
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've got a question for you.
I am getting a lot of oil through the tube that connects the passenger side valve cover to the throttle body. I believe it's what you refer to as the "clean side". That's where I was planning on putting a catch can. But I noticed that someone else did that and was told that he had it in the wrong location.
In my case, that seems to be where I do need it. Why is that? Why is my clean side pumping oil into my throttle body? And yes, I did double check. There is definitely il coming in the clean side.
Is this normal? Or do I have a problem I am unaware of? The car is running well, I just don't like the mess.
Do I need a catch can on both the clean and dirty side? Or is there another solution?
I am getting a lot of oil through the tube that connects the passenger side valve cover to the throttle body. I believe it's what you refer to as the "clean side". That's where I was planning on putting a catch can. But I noticed that someone else did that and was told that he had it in the wrong location.
In my case, that seems to be where I do need it. Why is that? Why is my clean side pumping oil into my throttle body? And yes, I did double check. There is definitely il coming in the clean side.
Is this normal? Or do I have a problem I am unaware of? The car is running well, I just don't like the mess.
Do I need a catch can on both the clean and dirty side? Or is there another solution?
I'm running dual cans for this reason.
The following users liked this post:
nmass399 (03-07-2021)
#151
TECH Fanatic
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
For those of us with a 98-00 F-body, who retain their EGR system, where are you mounting these catch cans? I see alot of setups mounted where the EGR would be located, but none with the EGR in place. I'd love to see some pictures of both single and dual can setups, so I can get an idea of what location works the best for fit as well as looking like its where it belongs.
#155
Teching In
Join Date: Mar 2009
Location: Queensland Australia
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is my first post guys so hope it works out. I currently have this setup on a LS1 with a PWR Blower (positive displacement?). My question is, can I use the single can LS1 valley cover - Turbo diagram as pictured previously? It is a straight foward diagram from what I see. Just wanted to know if there is any difference between turbo or top mount S/C applications.
I purchased the vehicle with this setup a year ago and I am confused in what it is trying to do. Everything is going into the blower manifold, and is very different to the combinations described in this thread.
I am proposing a catch can as I am currently finding a little bit of oil behind the butterflies.
Some explanation on my current setup would be greatly appreciated.
I purchased the vehicle with this setup a year ago and I am confused in what it is trying to do. Everything is going into the blower manifold, and is very different to the combinations described in this thread.
I am proposing a catch can as I am currently finding a little bit of oil behind the butterflies.
Some explanation on my current setup would be greatly appreciated.
Last edited by jackojr; 06-02-2009 at 07:25 AM. Reason: changed diagram
#156
TECH Addict
iTrader: (66)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just installed a revExtreme can on my 404, and I am still getting some smoke at idle, and a little at puff after I let off after a WOT pull. I have it ran like the diagram for a "single cath can with PCV orifice in the valley cover". I'm guessing I am getting oil from the "clean side" where I still have a line connected to my passenger valve cover to my throttle body. Can I not just cap those off and be done with that? Also What are you supposed to do with the other ports on the back of the passenger valve cover, and driver side port?
#157
TECH Addict
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is my first post guys so hope it works out. I currently have this setup on a LS1 with a PWR Blower (positive displacement?). My question is, can I use the single can LS1 valley cover - Turbo diagram as pictured previously? It is a straight foward diagram from what I see. Just wanted to know if there is any difference between turbo or top mount S/C applications.
I purchased the vehicle with this setup a year ago and I am confused in what it is trying to do. Everything is going into the blower manifold, and is very different to the combinations described in this thread.
I am proposing a catch can as I am currently finding a little bit of oil behind the butterflies.
Some explanation on my current setup would be greatly appreciated.
I purchased the vehicle with this setup a year ago and I am confused in what it is trying to do. Everything is going into the blower manifold, and is very different to the combinations described in this thread.
I am proposing a catch can as I am currently finding a little bit of oil behind the butterflies.
Some explanation on my current setup would be greatly appreciated.
Sorry for the delayed response, I've had to research your application. A few questions:
- Does your passenger side valve cover have a PCV valve in the rear or is it just a nipple?
- Looking at your diagram, is the passenger valve cover plumbed into the intake along with the vacuum booster and idle actuator? i.e. all tee'd together?
- Does the blower have a plenum the throttle body bolts to?
- Do you have any pictures?
#158
TECH Addict
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just installed a revExtreme can on my 404, and I am still getting some smoke at idle, and a little at puff after I let off after a WOT pull. I have it ran like the diagram for a "single cath can with PCV orifice in the valley cover". I'm guessing I am getting oil from the "clean side" where I still have a line connected to my passenger valve cover to my throttle body. Can I not just cap those off and be done with that? Also What are you supposed to do with the other ports on the back of the passenger valve cover, and driver side port?
- Are you running a vented oil cap?
- When you say 'little puff after WOT', from what source? i.e. valve cover, exhaust pipe, etc.
- Where are the rear lines from the DS and PS valve covers connected today?
#159
TECH Addict
iTrader: (66)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
- Are you running a vented oil cap?
- When you say 'little puff after WOT', from what source? i.e. valve cover, exhaust pipe, etc.
- Where are the rear lines from the DS and PS valve covers connected today?
I don't have the rear lines of the pvc connected at all. They are just vented to the atmosphere.
The puff I'm talking about is when I accelerate, and it is coming from the exhaust. I pulled the lid and MAF to check inside the TB and intake, and it is bone dry.
Should I reconnect the driver side and pass. side?
#160
Teching In
iTrader: (1)
Join Date: Nov 2008
Location: Seattle, WA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just have to say that this thread is tremendous! At first, I just got more confused. But, as I read more and more, the confusion slowly lifted. Now, I think I can actually put these on the car so that they actually serve a useful purpose (besides bling). Thanks to all that contributed.