Ebay 92 and 102mm throttle bodies...
#1
Ebay 92 and 102mm throttle bodies...
Anyone run one of these throttle bodies? This seems like a question that has probably been asked 1,000 times, but I couldn't find anything in a search..
102mm Version
92mm Version
The only thing I notice at first glance is no hole in the TB, but I could fix that problem and save $200 from what I can tell?
102mm Version
92mm Version
The only thing I notice at first glance is no hole in the TB, but I could fix that problem and save $200 from what I can tell?
Trending Topics
#10
Just wanted to update this thread. The TB looks great, all the machining is perfect as far I can tell. I am planning on doing some work on it though. It has similar issues to a stock TB, its just A LOT bigger!! Ill most likely do the bump stop mod, half shaft mod, knife edge blade and outer TB lip, and possibly port the lower portion of the TB. It has a slight "hump" in it on the bottom like the stock TB. Anyone know why it would have that?
The "L" rotates to wherever it needs to be and comes out. I'm not sure how tight the seal needs to be there?
You can see it has the shaft on both sides. Even if I don't do the half shaft mod, I will grind the screws flush as they protrude.
Here you can see the hump, its not huge, but it is there, and you can tell they put it there on purpose?
The "L" rotates to wherever it needs to be and comes out. I'm not sure how tight the seal needs to be there?
You can see it has the shaft on both sides. Even if I don't do the half shaft mod, I will grind the screws flush as they protrude.
Here you can see the hump, its not huge, but it is there, and you can tell they put it there on purpose?
#14
Yea I haven't posted much over there, but I am. I'll probably start posting more though, A couple years ago when I joined it was a bunch of ricers so I didn't get back on till just recently..
You on sffba? I've been more active on there, but its pretty dead these days..
You on sffba? I've been more active on there, but its pretty dead these days..