Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Help me identifiy this piece

Thread Tools
 
Search this Thread
 
Old Mar 19, 2013 | 06:57 PM
  #1  
West Texas Blues's Avatar
Thread Starter
Staging Lane
 
Joined: Jun 2009
Posts: 98
Likes: 0
From: West Tex
Default Help me identifiy this piece

While I was under the car yesterday I saw this thing tangled up in the fuel/brake lines by the transmission. I don't know what it's for, so any help is appreciated.
Attached Thumbnails Help me identifiy this piece-sam_2479.jpg  
Reply
Old Mar 19, 2013 | 08:08 PM
  #2  
_black_sunshine_'s Avatar
On The Tree
 
Joined: Oct 2007
Posts: 168
Likes: 0
Default

you have a t56?
Reply
Old Mar 19, 2013 | 09:04 PM
  #3  
slow ride 02's Avatar
TECH Resident
15 Year Member
 
Joined: Oct 2008
Posts: 801
Likes: 1
From: Anaheim Ca.
Default

Originally Posted by _black_sunshine_
you have a t56?
His "About Me" says auto.
Reply
Old Mar 19, 2013 | 09:22 PM
  #4  
S10xGN's Avatar
TECH Junkie
iTrader: (11)
 
Joined: Jul 2005
Posts: 3,782
Likes: 7
From: Port Neches, TX
Default

Looks like a vacuum switch or tee of some kind...
Reply
Old Mar 20, 2013 | 02:08 PM
  #5  
SickZ28's Avatar
On The Tree
iTrader: (8)
 
Joined: Apr 2008
Posts: 163
Likes: 0
From: Albuquerque, NM
Default

To me this looks like its the vacuum T that goes tied to the top 4L60E auto tranny vacum line and the other 2 hoses that run behind the block above the tranny case.
Reply
Old Mar 21, 2013 | 06:05 PM
  #6  
West Texas Blues's Avatar
Thread Starter
Staging Lane
 
Joined: Jun 2009
Posts: 98
Likes: 0
From: West Tex
Default

I have a 4L60E. After some searching I gather this is a "vbp-vac" that the forced induction guys use for the transmission. My car is pretty much stock, and I don't know much about forced induction, so I really don't know what to make of this since it was tangled in there pretty tightly.
Reply
Old Mar 21, 2013 | 06:09 PM
  #7  
West Texas Blues's Avatar
Thread Starter
Staging Lane
 
Joined: Jun 2009
Posts: 98
Likes: 0
From: West Tex
Default

Can a moderator plz move this to the automatic transmission section?
Reply
Old Mar 21, 2013 | 08:47 PM
  #8  
BennyB's Avatar
TECH Fanatic
15 Year Member
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,079
Likes: 4
From: Omaha, NE
Default

It's like a one way valve to vent the 4l60e trans. It's supposed to sit on top of the trans case
Reply
Old Mar 22, 2013 | 12:24 PM
  #9  
SickZ28's Avatar
On The Tree
iTrader: (8)
 
Joined: Apr 2008
Posts: 163
Likes: 0
From: Albuquerque, NM
Default

Originally Posted by BennyB
It's like a one way valve to vent the 4l60e trans. It's supposed to sit on top of the trans case
that's what i said as my car has one,

OP, have you checked under your car to make sure all vac lines leading to your top tranny case are in order and not dangling around.
Reply
Old Mar 22, 2013 | 07:45 PM
  #10  
West Texas Blues's Avatar
Thread Starter
Staging Lane
 
Joined: Jun 2009
Posts: 98
Likes: 0
From: West Tex
Default

Actually I did notice a short length of hose that was disconnected, but I didn't have time to inspect any further, the car is currently in the shop, is this something to be addressed urgently? (As in before I drive the car again)
Reply




All times are GMT -5. The time now is 08:55 PM.