Pacesetters suck
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jan 2003
Posts: 1,652
Likes: 0
From: miami beach fl
Pacesetters suck So far Im not happy with my pace setters. They bang **** moan and vibrate. But its not the normal y pipe banging complaint. My headers is bangin the hell out of the k member. I have tried prying and bending and creative "clearencing" to no avail. Im about to tear it all off and go back to stock, its that bad. Any body else had this problem. what did you do?
tia
tia
First I have to say.. "Calm down.. it'll be alright." 
Now, the solution to your problem is not prying at the headers. All you have to do is notch the k-member on the drivers side, and it will cure the banging and vibrating that you're experiencing. I didn't even have to remove the header to notch the K-member. Take care of this and I'm sure that you'll be happy..
"I Love Mine" the cheapest HP I've gotten yet...
Pacesetter Headers are pretty quality headers for the price that you pay.
Now, the solution to your problem is not prying at the headers. All you have to do is notch the k-member on the drivers side, and it will cure the banging and vibrating that you're experiencing. I didn't even have to remove the header to notch the K-member. Take care of this and I'm sure that you'll be happy..
"I Love Mine" the cheapest HP I've gotten yet...
Pacesetter Headers are pretty quality headers for the price that you pay.
Trending Topics
TECH Apprentice
Joined: Dec 2002
Posts: 380
Likes: 0
From: Simi Valley, CA
I clearanced about a 1/4" v-shape out of the k-memeber with a saws-all. I did this before the headers went in, so I don't know if you will have enough room for this after the fact. Even with the clearancing and having the ORY reworked, I am still having a slight amount of banging. My next step is to do a torque strap or poly motor mount to limit movement.
Good luck... it can be frustrating
Jeff
Good luck... it can be frustrating
Jeff
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
An old guy I work with that was into cars a long time ago once told me about taking a sledge hammer to the inner fenders of his '70 Hemi Cuda drag car. I bet the guy that restored that car 20 years later wanted to skin him.
That being said, poly motor mounts and trans mount is the fix for most banging.
That being said, poly motor mounts and trans mount is the fix for most banging.
Originally Posted by SilverSurfer
But truth be told, these headers do suck. My y-pipe bangs the floor board at 1/4 throttle.
Why does the y-pipe banging make the headers suck?
The y-pipe may suck, but the headers are pretty nice considering what you pay for them.And my y-pipe hasn't caused me any grief...
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jan 2003
Posts: 1,652
Likes: 0
From: miami beach fl
Well I finialy fixed the pace setter bang. Poly mounts didnt fix it only made it worse .
what did fix it was 3 1/2 washers in between each bolt for the trans x member.
lowered the headers and y far enough that they didnt bang any more finnaly I can
in peache
what did fix it was 3 1/2 washers in between each bolt for the trans x member.
lowered the headers and y far enough that they didnt bang any more finnaly I can
in peache 
TECH Fanatic
Joined: Aug 2003
Posts: 1,049
Likes: 0
From: Newport News, Va
I dont like any of pacesetters products...IMO If Pacesetter makes headers for a certain Camaro/Firebird, they should directly bolt on, you shouldnt have to grind anything... Just my 2 cents
Originally Posted by Just Floor It
I dont like any of pacesetters products...IMO If Pacesetter makes headers for a certain Camaro/Firebird, they should directly bolt on, you shouldnt have to grind anything... Just my 2 cents
