New Hooker 4th-gen F-body Headers and Exhaust
09-01-2015, 12:18 PM
#281
Just saw the complete blackheart offerings on Bangshift.com. and noticed you sell a replacement body brace. Never realized in the pictures that it had been taken off. I have a midmount torque arm setup on my car (it mounts where the factory body brace was) and it clears my 3" catback. Have you tried to see if an aftermarket midmount crossmember will fit with your exhaust? I know I could mod mine if needed, but would like to know before I start ripping my exhaust off.
09-03-2015, 09:53 PM
#283
Just saw the complete blackheart offerings on Bangshift.com. and noticed you sell a replacement body brace. Never realized in the pictures that it had been taken off. I have a midmount torque arm setup on my car (it mounts where the factory body brace was) and it clears my 3" catback. Have you tried to see if an aftermarket midmount crossmember will fit with your exhaust? I know I could mod mine if needed, but would like to know before I start ripping my exhaust off.
09-10-2015, 08:59 PM
#286
Staging Lane
Join Date: Mar 2015
Location: New Jersey
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
According to Texas Speed they start shipping the 50 state version on the 15th. Is that when Holley is releasing them to all venders that will carry it, or only when Texas Speed will have them?
09-10-2015, 10:12 PM
#287
A release of a product for shipment carries the same availability for all of our resellers. However, if a reseller does not have the product entered into their system then you will have difficulties ordering the part from them. I can tell you that the 50-state versions will not be ready by the 15th as we are running behind on production currently.
09-10-2015, 11:46 PM
#288
Staging Lane
Join Date: Mar 2015
Location: New Jersey
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
A release of a product for shipment carries the same availability for all of our resellers. However, if a reseller does not have the product entered into their system then you will have difficulties ordering the part from them. I can tell you that the 50-state versions will not be ready by the 15th as we are running behind on production currently.
09-13-2015, 12:43 AM
#289
I'm interested in the one that fits right to my cats but I have a Lakewood driveshaft loop. Will it still fit?
Its like the one here.
https://ls1tech.com/forums/generatio...6k-beware.html
Its like the one here.
https://ls1tech.com/forums/generatio...6k-beware.html
09-13-2015, 11:40 AM
#290
I just learned this system exists two days ago, I'm ordering it! I've been daily driving my 383 LS6 HCI 02 Z28 with 3" true duals dumped for a month or so while I'm swapping my 2000 Hombre. I basically get up on rainy days wishing I had a Y-pipe and exhaust out the back because it's so loud. Staring longingly at that Kooks system hasn't gotten me over that sticker shock. While I wish this was 3", it's worth the price difference compared with the Kooks!
I'll be ordering the 304SS kit and retrofitting it to my TSP 1 7/8 LTs, thanks for making this kit, Hooker!
I'll be ordering the 304SS kit and retrofitting it to my TSP 1 7/8 LTs, thanks for making this kit, Hooker!
09-20-2015, 09:57 AM
#293
Teching In
Join Date: Jun 2014
Location: Tennessee
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New Hooker 4th-gen F-body Headers and Exhaust Coming Soon I visited the Holley trailer at LSFest and the guy there told me that a long tube header from Blackheart was real close to production. He told me to stay in touch with the tech dept to know when to place my order. He said they were building them as tight to the firewall and floorboards as possible to leave as much ground clearance as possible. I've tried calling the tech dept 3 different times and never got through. I'm guessing with LSFest and the good guys show in town they are really thin. Have you got any insight on any long tube Blackheart headers for the F-body Camaro?
09-20-2015, 10:22 AM
#294
I visited the Holley trailer at LSFest and the guy there told me that a long tube header from Blackheart was real close to production. He told me to stay in touch with the tech dept to know when to place my order. He said they were building them as tight to the firewall and floorboards as possible to leave as much ground clearance as possible. I've tried calling the tech dept 3 different times and never got through. I'm guessing with LSFest and the good guys show in town they are really thin. Have you got any insight on any long tube Blackheart headers for the F-body Camaro?
09-20-2015, 11:44 AM
#295
Teching In
Join Date: Jun 2014
Location: Tennessee
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New Hooker 4th-gen F-body Headers and Exhaust Coming Soon I asked for his name or a card, but he said anyone in the tech dept could help me. He was late 20s, 6ft about 240 with sandy hair. We were looking at the F-body mid length headers on the display and there were some 5th Gen long tubes hanging beside them. He said 4th Gen were in mock up and should release by month end. Of course he could be mistaken too. He thought that they would adapt to the cat back exhaust system easier, so I have a cat back system on order that if you are correct, I need to get cancelled and just go the mid length route.
09-20-2015, 03:15 PM
#296
I asked for his name or a card, but he said anyone in the tech dept could help me. He was late 20s, 6ft about 240 with sandy hair. We were looking at the F-body mid length headers on the display and there were some 5th Gen long tubes hanging beside them. He said 4th Gen were in mock up and should release by month end. Of course he could be mistaken too. He thought that they would adapt to the cat back exhaust system easier, so I have a cat back system on order that if you are correct, I need to get cancelled and just go the mid length route.
09-24-2015, 12:13 PM
#299
09-24-2015, 01:24 PM
#300
TECH Resident
