Speed Engineering True Dual Exhaust Kits!!
06-23-2018 | 09:55 AM
#901
Staging Lane
Joined: Jan 2014
Posts: 58
Likes: 0
From: Chesterton, Indiana
i have to agree the systems is awesome but can be a bit loud, Has anyone thought of putting mufflers on this system? I have no cats and i understand it's still going to be loud. Just want to tone it down a bit. what would be the best option for mufflers?
06-25-2018 | 04:47 PM
#902
06-26-2018 | 07:52 AM
#903
Staging Lane
Joined: Jan 2014
Posts: 58
Likes: 0
From: Chesterton, Indiana
i appreciate your input, unfortunately the time is there but not the money. I'll do some research on chambered muffler's . Just need to tone it down a notch. unhappy wife in car makes for an uncomfortable ride,lol.
06-26-2018 | 09:50 AM
#904
06-26-2018 | 02:41 PM
#905
When you look at all of these true dual systems on offer (apart from Hooker Blackheart with its 2.5 inch piping and 5 inch diameter mufflers) you just know they’re going to be excessively loud surely... 12-14 inch long race bullet mufflers ain’t doing much at all for sound deadening.
The following users liked this post:
rbl3 (01-15-2020)
06-29-2018 | 08:26 PM
#908
Teching In
Joined: Jan 2009
Posts: 25
Likes: 0
From: NC
I am lowered. 1.5in. I did some mods on the back for better clearance and less rub running the Z06 wheels. I can get some measurments and let you know.
07-09-2018 | 12:34 PM
#910
Staging Lane
Joined: Jan 2014
Posts: 58
Likes: 0
From: Chesterton, Indiana
I've made adjustments and just can't get the clearance i need. grant it my car is lowered with bmr lowering spring. went out for a cruise and exhaust got caught up and pulled apart. I understand it's aftermarket and all but this is becoming more of a pain then it's worth. trying to see what Ls1-justin did differently but cant tell. Not trying to knock the system but it just isn't working for me.
07-10-2018 | 09:36 AM
#911
here's what I did...
Make sure you get the better grade 8 bolts if you haven't already. Put the back end up on jack stands with the bolts loose. Put a jack under the X pipe, push it up against the floor and tighten everything up really nice and tight. My car is on a full Straino drop suspension and it only scrapes on speed bumps and really really bad roads
Make sure you get the better grade 8 bolts if you haven't already. Put the back end up on jack stands with the bolts loose. Put a jack under the X pipe, push it up against the floor and tighten everything up really nice and tight. My car is on a full Straino drop suspension and it only scrapes on speed bumps and really really bad roads
07-10-2018 | 01:39 PM
#913
Staging Lane
Joined: Jan 2014
Posts: 58
Likes: 0
From: Chesterton, Indiana
made some adjustments last night. see how it works. I think i got it up a bit but not much. other thing is it's a little loud for my taste but it is what it is now. I can deal with the sound but it sitting low bothers me, it doesn't help i'm sitting on bmr lowering springs as well.
07-16-2018 | 03:32 PM
#915
TECH Resident
Joined: Jul 2007
Posts: 967
Likes: 53
From: Winter Haven FL
Anyone using the over axle kit with any of the 3 point subframe connectors? From the pics it looks like there should be clearance, but I don't want to buy the kit and find out it doesn't work.
07-19-2018 | 03:52 PM
#916
TECH Addict
Joined: May 2012
Posts: 2,753
Likes: 558
From: Poplarville, MS
07-27-2018 | 10:08 AM
#920
TECH Fanatic
Joined: Jan 2017
Posts: 1,743
Likes: 425