When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Speed engineering, do you sell the updated x Pipe only? I buy the second batch of your kit but I need the better x Pipe. I'm lowered.
any pics of the update
Speed engineering, do you sell the updated x Pipe only? I buy the second batch of your kit but I need the better x Pipe. I'm lowered.
any pics of the update
I'd like to know this also. I bought the kit when the first batch come out. I had it on my car with a few issues, but I'm running a MWC tunnel mounted torque arm setup. I recently did a engine swap on my car and trying to fine tune the fitment of the exhaust and I'm having the most trouble with the x-pipe right now. I'd be interested if you guys sold the new one but if not I'll just do some cutting and welding on the current.
We should have one or two laying around we plan to put in our clearance section. The only problem is I believe we changed the rear pipes before the axle to work with the new x-pipe, and I am not sure if we have any of those laying around. Right now our sales guys are working from home, and our shipping guys are just there. You might give us a call in a few weeks when our sales guys return. They can look further into it for you.
Didn't actually quiet it down it changed the tone and eliminated interior drone which Is what my ears can’t handle. I’m going to see what a single ring will do. Maybe put it further up stream.
True dual sound is what I wanted.
I wonder what they sound like with the spirals installed.
It will fit a 95 but you will probably need to modify it. You may need to modify it to fit the headers or manifolds and the exhaust brackets may need tweaked as well.
Installed my SE setup a few weeks ago replacing a custom 3" dual exhast setup that had some crappy bends. SE setup is nice quality but the drone and smell without cats was rough. So started with some magnaflow high flow cats. Didn't like the crushed pipe on the drivers side so ordeted some polished tubing from summt and replaced that section. Also had to cut a v notch in the drivers side pipe before the x-pipe area so it would tuck up more. Then on to the rear section where I replaced the SE mufflers with a set of flowmaster pro series shorty mufflers. Ended up having to do a lot of cutting and welding in the real to fit the mufflers and also added v-bands back there so I could change mufflers fairly easy down the road if wanted. 75% of the drone went away but deffinently still there.
Thanks. So far I haven't put any tips on it. Just using the muffler as the final piece. I will most likely use a turn down though as I was measured at 98db this last weekend at the local auto-x event (Have a 95db limit).
Originally Posted by ElkySS
What mufflers are those? Besides the drone, how does it sound?
They are the flowmaster pro series shorty. Sounds really good. If you do a search there is a great video of a guy testing multiple flowmasters which led me to get these. Just a youtube search of "7 flowmaster comparison" should easily locate if for you.
Just put speed engineering full exhaust on my 03 2500hd. Great system overall. Here's a install vid with a little sound clip in it. I'll do a driving vid here soon.