AiDRocks

iTrader: (13)

Would this fit my Mac mids?

bbond105

My kit did not come with installation instructions. Did anyone else’s kit have instructions?

soloman369

iTrader: (13)

No mine didn't. This the exhaust was kinda self explanatory.

2ToeRacing

iTrader: (5)

^^^^^I went to the hardware store Saturday and picked up some nuts/bolts and lock washers. Fixed the clamps like they are in the picture. I installed the system and the clamps worked great. Now the pipes hit the upper PAB and rattles its *** off. I'm gona have to come up with a hanger to hold the pipes up. Has anyone had this problem and if so how did you fix it... outside of going to the muffler shop?

Darth_V8r

iTrader: (4)

Dbx also

MChampion

Had the same problem. I fixed it by rotating the passenger side tail pipe/muffler on the over-axle pipe and put more weight/tension on the hangar. You need to hold it in that position when tightening the clamp, so You may need two people.

zachm89

iTrader: (14)

Good idea with using the existing clamps with new hardware for cheap. Ill definitely do that when I order one of their kits. I also think a cheap set of dynomax race bullets would sound killer if someone doesnt like the sound of the supplied mufflers. And they're only 50 bucks a piece.

zachm89

iTrader: (14)

Thanks for the pic. Give me an idea how much room I will have to play with if I decide to run a different set of mufflers with turn downs instead of the supplied tips. Mainly because I have never been a fan of tips out the back on a camaro other than a CME setup.

zachm89

iTrader: (14)

Is the DBX the newest version of the Hushpower line? Ive never been a fan of Flowmasters chambered mufflers but have always wanted to give their straight through mufflers a shot.

Darth_V8r

iTrader: (4)

Yes it is. it's basically a straight through with a wire mesh. It supposedly has laminar flow. I didn't notice a power difference between the kooks bullets and the DBX, but my ear drums and neighbors definitely noticed a difference.

G Atsma

MUCH quieter, or a little? Or louder? You really don't say...

Mikegto417

Would this kit work with hooker headers?

RooRnZ28

iTrader: (14)

Great to finally see a nice true dual setup for our cars!! Will definitely keep an eye on this thread for more installed pics and feedback.

AiDRocks

iTrader: (13)

Gonna have to subscribe to this.

Darth_V8r

iTrader: (4)

Dropped from 115 dB to 90-95 dB. So, significantly quieter. But still loud compared to 99% of cars on the road. QUiet enough I stopped receiving death threats

2ToeRacing

iTrader: (5)

I'll give it a try,thanks MChampion.
I also don't like the tips,I don't like anything other then CME. I'm still trying to figure out if I can make them work with this exhaust. I ran it with the tips on and didn't like the sound. I removed them and it give it a deeper tone but it is louder then I would like. I had a borla before and I liked how it sounded at idle and it would scream at WOT.

Speed Engineering

iTrader: (35)

Thank you guys again.. We have actually been referring some customers to this thread. A lot of good info being discussed.

Thanks
Sean

KingJacobo

Any info on if cats could be fabbed up in this exhaust?

2ToeRacing

iTrader: (5)

I was thinking the same thing.I'm sure my car will pass the way it is now. I'm thinking cats might quit it down some????? Its just a little to loud,no that's a lie its alot to loud "for me"riding down the road,I'll come up with a answer to make it sound like I want. It is fun when your into it though......
I have to say tho....it is one hell of a nice system with a nice price.

Mikegto417

Are you still running the stock cam?