Edelbrock or Pacesetter?
#133
Ok i see everyone talking about long tube edelbrock headers-well i was going to buy those but everyone told me they would pass smog! So i bought shorty's for 479.00 my question is did i get raped on the price? Or is that about right? N one more question how hard is it to install them into a 1999 ws6 trans am?
#134
TECH Apprentice
iTrader: (2)
Join Date: Dec 2004
Location: Pensacola, Florida
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Full-Force
I Cant offer an opinion on the Edelbrocks except to say that I think they are a tad too much header for most people. The 375 price is painted which will burn off instantly upon startup.
I can offer an opinion on the Pacesetter's because I just installed mine tonight. The passenger side, piece of cake. Just raised it staright into the car. The driver side, piece of pie only because I had to take 5 minutes or less to take the steering shaft loose and swing it up out of the way and then that header just popped right in. After they were torqued down they cleared EVERYTHING by a mile. I got big hands (13.5 ring finger) and I could put my hand all around the k member at the collectors. The coating was perfect. They have a nice thick 3/8" flange. At 375 bucks coated they cant be beat IMO.
I can offer an opinion on the Pacesetter's because I just installed mine tonight. The passenger side, piece of cake. Just raised it staright into the car. The driver side, piece of pie only because I had to take 5 minutes or less to take the steering shaft loose and swing it up out of the way and then that header just popped right in. After they were torqued down they cleared EVERYTHING by a mile. I got big hands (13.5 ring finger) and I could put my hand all around the k member at the collectors. The coating was perfect. They have a nice thick 3/8" flange. At 375 bucks coated they cant be beat IMO.
http://www.ls2.com/forums/showthread...hreadid=155799
#135
TECH Apprentice
iTrader: (2)
Join Date: Dec 2004
Location: Pensacola, Florida
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aram
Where can you get them for $375 coated?
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V
Check out that link. This is who I bought mine from. For 357.99 plus shipping of 35.00 he will sell them for every application even race style. He has them drop shipped from a big company. Best price you will find on pacesetter.
#137
TECH Regular
iTrader: (21)
Join Date: Sep 2004
Location: Lake Zurich, IL
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a good deal to me!
Originally Posted by UnleashedBeast
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V
Check out that link. This is who I bought mine from. For 357.99 plus shipping of 35.00 he will sell them for every application even race style. He has them drop shipped from a big company. Best price you will find on pacesetter.
Check out that link. This is who I bought mine from. For 357.99 plus shipping of 35.00 he will sell them for every application even race style. He has them drop shipped from a big company. Best price you will find on pacesetter.