Need To Dump Loudmouth
#1
Need To Dump Loudmouth
Fellas, I'm in Massachusetts with noise *****. My LM is way too loud. I haven't tried but I think I would be hard-pressed to get a sticker now. I'm thinking about a Hooker to keep costs and noise down. Would that be a good choice? Anything under $500.00 that would be better? What about welding a muffler in my LM?
Any advice would be greatly appreciated. As the situation is now, I'm screwed.
Thanks.
Any advice would be greatly appreciated. As the situation is now, I'm screwed.
Thanks.
#2
Maybe just swap out the LM resonator for a regular bullet. LM is supposed to be loud as hell with headers, which you have. You can get a bullet for like 30 bucks from Summit, get it welded in for another 20 or so.
#3
Thanks dude, any brand name I can look for (bullet)?
If I don't go the bullet route, I might need to get the SLP Dual/Dual to be sure of passing. The cops told me that I can't have anything but the stock exhaust, and the SLP could pass for stock, but the bottom line is that I know if I can get it quieter than the LM I can pass.
Thanks again!
If I don't go the bullet route, I might need to get the SLP Dual/Dual to be sure of passing. The cops told me that I can't have anything but the stock exhaust, and the SLP could pass for stock, but the bottom line is that I know if I can get it quieter than the LM I can pass.
Thanks again!
#5
Originally Posted by Predator
What about the Loudmouth II Bullet?
The ones I was talking about are made by Dynomax, they put them in the TSP Rumbler.
Trending Topics
#10
Originally Posted by taintedmeat
Maybe just swap out the LM resonator for a regular bullet. LM is supposed to be loud as hell with headers, which you have. You can get a bullet for like 30 bucks from Summit, get it welded in for another 20 or so.
#11
Originally Posted by Predator
I found the Dynamax in 3" or 2 1/2" diameters. I think the LM is 3"?
Is the XR1 made by Dynamax?
Thanks!
Is the XR1 made by Dynamax?
Thanks!
I'm pretty sure both of the LM exhausts are 3 inch.
#12
Originally Posted by TXZ28LS1
try the hooker catback. it has that sweet deep rumble. and it doesnt rasp like the magnaflow. and with longtubes i hear that hooker catback gets loud.
Thanks.
#13
Originally Posted by Predator
The LM was okay when I was stock, and not too bad with headers, but after the cam it became a monster. I liked it, but I don't run an inspection station.
#17
Originally Posted by taintedmeat
You'll have basically the same exhaust if you get a Dynomax 18inch bullet. Yours will probably be a little louder though.
Thanks!
#19
Originally Posted by JoeyAnderson
If you want to change catbacks completely, Magnaflow is pretty quiet.
I can't believe the cops are so hard on you man. That is crazy.
I can't believe the cops are so hard on you man. That is crazy.
We have noise ordinances on the books now.
Thanks.