04-25-2016, 04:07 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Air Intake and Exhaust Guides
- Camaro and Firebird: Catback Exhaust Reviews
Review and comparison of top products
Browse all: Air Intake and Exhaust Guides
True Duals, questions answered here. Post YOUR information and pics too!
06-29-2009, 05:18 PM
#561
TECH Enthusiast
"There are basically two different dual exhaust setups that are available, the difference being the style of crossover pipe used. A crossover pipe will produce more power and better sound than not using one! In a nutshell, the X-pipe will give you better horsepower and torque and the H-pipe will give you better sound"
I personally have no crossover pipe due to having a custom set-up and not having the extra cash to have a crossover installed at the time. I can tell a slight decrease in torque, but not a whole lot. It still sounds very good though IMO, however just from what I've read online I will have a crossover pipe installed later on to create a "H". I am interested to see if I can tell a difference.
06-30-2009, 03:32 PM
#564
TECH Fanatic
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
Spintech sportsman street xl mufflers 3331xl
ok here is the scoop, I built this exhaust using the summit x pipe kit, add an h-pipe, and about a million random bends i bought in a brown box off ebay. I decided to keep the mufflers in the stock location. If i ran these before the axle, the would scrape on everything. They are big mufflers.
Sound Clip: http://www.lt1engine.com/videos/video/KhGv-Fnht1c
ok here is the scoop, I built this exhaust using the summit x pipe kit, add an h-pipe, and about a million random bends i bought in a brown box off ebay. I decided to keep the mufflers in the stock location. If i ran these before the axle, the would scrape on everything. They are big mufflers.
Sound Clip: http://www.lt1engine.com/videos/video/KhGv-Fnht1c
Last edited by luckyou03; 07-01-2009 at 09:17 AM.
06-30-2009, 05:53 PM
#566
Spintech sportsman street xl mufflers 3331xl
ok here is the scoop, I built this exhaust using the summit x pipe kit, add an h-pipe, and about a million random bends i bought in a brown box off ebay. I decided to keep the mufflers in the stock location. If i ran these before the axle, the would scrape on everything. They are big mufflers.
ok here is the scoop, I built this exhaust using the summit x pipe kit, add an h-pipe, and about a million random bends i bought in a brown box off ebay. I decided to keep the mufflers in the stock location. If i ran these before the axle, the would scrape on everything. They are big mufflers.
07-01-2009, 08:56 AM
#569
TECH Fanatic
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
I added an idle video to the original post ^^ ( Sorry only two weak *** revs in it, the motor was still cold)
Last edited by luckyou03; 07-01-2009 at 09:09 AM.
07-02-2009, 06:01 AM
#571
TECH Fanatic
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
Cabin noise is MUCH nicer now than it was. I had single chambers dumped at the rear axle and I couldn't think straight with them there. I don't know what you mean by the mufflers resonating off each other? they don't move or rattle. I got the idea from this link: http://www.off-road.com/trucks4x4/ar....jsp?id=198878
07-02-2009, 08:31 PM
#572
Cabin noise is MUCH nicer now than it was. I had single chambers dumped at the rear axle and I couldn't think straight with them there. I don't know what you mean by the mufflers resonating off each other? they don't move or rattle. I got the idea from this link: http://www.off-road.com/trucks4x4/ar....jsp?id=198878
repositioned the mufflers and the noise went away.
trick setup, though.
ive seen them side by side back there, but never stacked.
07-22-2009, 12:23 PM
#574
Teching In
Join Date: May 2009
Location: Kansas City
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Just got mine installed a few weeks ago...
Hooker Longtubes, Magnaflow Cats, Flowtech X-Pipe, Flowmaster Single Chambers
The setup is currently over both sides of the axle
Gound clearance in the fourth picture looks terrible but I really have almost a full soda can
No sound clips yet but they will come
Hooker Longtubes, Magnaflow Cats, Flowtech X-Pipe, Flowmaster Single Chambers
The setup is currently over both sides of the axle
Gound clearance in the fourth picture looks terrible but I really have almost a full soda can
No sound clips yet but they will come
07-22-2009, 11:04 PM
#578
Teching In
Join Date: May 2009
Location: Kansas City
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
