Xtnct00WS6

iTrader: (8)

What's the overall opinion...does this look ghetto?? (Not the tips...just the fact it goes under the axel)

Edit: this isn't my car. I was just thinking of doing my exhaust like this

LS1-NAVY

iTrader: (1)

i dont think it does

ErikElvis

iTrader: (1)

I think it looks kinda ghetto but who cares. For the most part nobody will ever see em.

stoverz28

iTrader: (8)

it just looks like it wouldbe a bitch trying to put the axle on stands.

01WS6/tamu

iTrader: (37)

Only those in the know, know what is going on. The bend quality of the pipe looks good and it's symetrical. It also will not knock and raise hell like it probably would if you put duals over the axle. I vote ok.

Jimmy P

iTrader: (177)

It looks fine to me.

96lt1m6

iTrader: (31)

i have the set up and ghetto or not it works looks clean and sounds badass.

Sharpe

iTrader: (7)

It's sooo much cheaper and the pros probably outweight the cons as far as I can tell.

But, yes, ghetto. Hate the way it looks, and I'm sure the car behind it can see that they go under the axle. Wouldn't do it to my car, but I can certainly understand those that do.

Braunbeck

iTrader: (4)

Maybe some different angled pictures and a side shot to see how low it hangs. It reminds me of the SVT Cobra exhaust in the styling. I don't know if I'd do it though.

ChocoTaco369

I just absolutely hate the way it looks. Yea it's easier, yea it's cheaper, but you're getting custom true duals. May as well be the way you want it. Besides, if you ever need to drop the rear or change the fuel pump or anything, it looks like a disaster waiting to happen.

Dskeet6

iTrader: (20)

If I owned the car I would paint the exhaust black from somewhere near the tips(maybe where they start bending down to approach the diff), to somewhere in the middle of the car...... this will make the pipes MUCH harder to see at first glance

also some pics from different angles and heights would be nice....

sorta ghetto but im sure it flows great and sounds great....

also if you ever have a problem with the rear, i would just cut the exhaust in front of the rear and put it back together with clamps or some sort of connection after rear end is back in..... if this is possible?????? just an idea

TARZAN

iTrader: (12)

Looks fine to me....I'd dump it personally, though

-Will

AronZ28

iTrader: (2)

Does it hit the ground???

Looks like a real scraper to me.

Mudvayne

iTrader: (1)

Seeing as I live in Oklahoma (worst roads in the nation) I wouldn't. I might though if I lived in a different state.

Also how much does a person usually save between under and over the axel setups?
Assuming it's done properly.

chrisdacarnut

iTrader: (1)

I don't know about you, but I've never scraped my differential on anything other than a squirrel or two... lol

But nearly all header and ory cars scrape.

MeentSS02

iTrader: (11)

It looks ghetto, but gets the job done. I would never do it on mine (and didn't), but you can do whatever you please.

HavATampa

iTrader: (49)

Blech...don't like it. Do it right and go over the axle.

ricketzSS

iTrader: (8)

I dont think it looks to bad, i think of an 03/04 Cobra when i see it. I wouldnt have gone dumps on a T/A just because of the rear bumper, they look odd without tips. On a Camaro i would go dumps.

3rdgentug

iTrader: (23)

why do you care whatevery one elses opinion is

its your car,
opinions are like ********..........

me personally i hate when the TA's dont have tips in the rear...looks like somethings missing

Bryan @ Speed Inc.

iTrader: (19)

i don't like it... i just think it'd be bottoming out on everything....

i figure either do duals off the header, to the axle, or just go with a custom y-pipe and a good cat-back.

i don't like exhuast tips generally. so i personally don't care to have exhaust ran out the back regardless.