MTI Introduces New Stage IIE Cylinder Head!
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Houston, TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
MTI Introduces New Stage IIE Cylinder Head!
MTI has been hard at work developing an extremely high flow economical cylinder head for the last few months. What has been developed is a 300+ CFM LS1 cylinder head with MTIs unique extremely reliable valvetrain. The Stage IIE cylinder heads are equipped with 2.02" / 1.55" Ferrea 6000 series extreme duty stainless valves, MTIs proprietary dual valve spring valvetrain with custom spring locators and titanium retainers. This valvetrain has been in use for years and installed on hundreds of cylinder heads without failure or rocker arm clearance issues.
LS1 Flow #s are as follows:
Intake/Exhaust CFM:
.100 65 / 53
.200 135 / 105
.300 195 / 141
.400 244 / 165
.500 276 / 193
.550 292 / 202
.600 300 / 208
.650 306 / 211
These professionally hand ported & assembled cylinder heads are available for $1595. exchange and will come with a flow sheet for each individual set. This includes all Gen III aluminum type cylinder heads. LS6 flow #'s will be available shortly.
For more information & to view flow sheets visit: http://www.motorsporttech.com/fbody_engine01.asp
If you have any questions about these cylinder heads, e-mail me at JaysonMTI@aol.com
Jayson - MTI
LS1 Flow #s are as follows:
Intake/Exhaust CFM:
.100 65 / 53
.200 135 / 105
.300 195 / 141
.400 244 / 165
.500 276 / 193
.550 292 / 202
.600 300 / 208
.650 306 / 211
These professionally hand ported & assembled cylinder heads are available for $1595. exchange and will come with a flow sheet for each individual set. This includes all Gen III aluminum type cylinder heads. LS6 flow #'s will be available shortly.
For more information & to view flow sheets visit: http://www.motorsporttech.com/fbody_engine01.asp
If you have any questions about these cylinder heads, e-mail me at JaysonMTI@aol.com
Jayson - MTI
#6
Launching!
Thread Starter
Join Date: Nov 2001
Location: Houston, TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Re: MTI Introduces New Stage IIE Cylinder Head!
what lift are the dual springs you provide good up to? You list .650 on your flow chart but that wont do much good if you cant get a cam that large
thanks
Bill
thanks
Bill
Trending Topics
#8
Launching!
Thread Starter
Join Date: Nov 2001
Location: Houston, TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Re: MTI Introduces New Stage IIE Cylinder Head!
Need a test car
#10
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Locust Fork, AL
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Re: MTI Introduces New Stage IIE Cylinder Head!
well...i think im sold, since i want about an X1 sized cam
Im glad these are out, cause i was never really sold on your old prices for StageII's
Im glad these are out, cause i was never really sold on your old prices for StageII's
#12
TECH Fanatic
Join Date: Mar 2002
Location: Your Reality Check Bounced...
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
Re: MTI Introduces New Stage IIE Cylinder Head!
Hey Jayson...trade ya my Stage II's for these and see how they perform w/ur X1 in my car...hehe...
Good job on the heads bro, sounds like TEA might have a lil more competition now...their 1.5 heads seem to be making similar power to these at about the same price...
Good job on the heads bro, sounds like TEA might have a lil more competition now...their 1.5 heads seem to be making similar power to these at about the same price...
#17
11 Second Club
Re: MTI Introduces New Stage IIE Cylinder Head!
Let the price war begin first patriot...then JPR...now MTI all with good #'s makes for some good choices. Looks like you cant go wrong with any of them Good job guys in keeping competetive.
lata
Bill
lata
Bill
Competiton is good for the consumer!