230 reverse split vs el torro
#21
We've already hashed this out several times. I'm not getting into why you are wrong yet again. You have all your fans here to jump to your side, but on other forums you were exposed. Maybe if your reverse splits carry so well, you could have another explanation to why Chris's car more or less fell on it's face on the back end of the quarter mile compared to other cam only cars?
Look at what EPS is doing. Finally someone is getting these cams right.
Look at what EPS is doing. Finally someone is getting these cams right.
it is a trade off...you should know that...no one said the 230 cam was going to make more peak than a trex 24x cam...
reverse splits have there place...and the el torro is barely a RS just in ramp rates...
#24
11 Second Club
iTrader: (1)
Join Date: Mar 2006
Location: Simpsonville, SC
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Well i have a ms3 that i am getting rid of to get the el-torro but with alittle more exhaust duration so i can do heads and make better power. Its all about the set up and what your goals are for your car that matters. Chris's car f-ing moves and i dont care what anyone else says. He has it set up right and it does what he wants.
#26
Viperetr2, just post your vid where you ran 10's..lol.. **** hauled ***** down the track!! i run the X1 230/227 and have no complaints at all. it drives soo smooth its crazy. i can start my car up anytime, barely any surging, doesnt buck, doesnt die out, and i can drive with my A/C on all day.
Larry
#27
TECH Senior Member
We've already hashed this out several times. I'm not getting into why you are wrong yet again. You have all your fans here to jump to your side, but on other forums you were exposed. Maybe if your reverse splits carry so well, you could have another explanation to why Chris's car more or less fell on it's face on the back end of the quarter mile compared to other cam only cars?
Look at what EPS is doing. Finally someone is getting these cams right.
Look at what EPS is doing. Finally someone is getting these cams right.
Say hello to Brett for me, you are inputing zero tech, just regurjutating someone elses falacy.
Cam design is not all about peak Hp or peak rpm. That is what sells.
#29
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: texas
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
wow so many different poinsts of view...
if i wanted this el orro cam... how or where can i get it.. what springs should be uses ???
this X1 cam looks nice also/// who sells it????
if i wanted this el orro cam... how or where can i get it.. what springs should be uses ???
this X1 cam looks nice also/// who sells it????
#31
TECH Senior Member
Here are the latest results on another "El Toro"
https://ls1tech.com/forums/13141776-post1.html
The specs at .050 are:
Intake lobes 3016R (XFI)
Exhaust lobe 3725R (XER)
111 LSA
109 ICL
https://ls1tech.com/forums/13141776-post1.html
The specs at .050 are:
Intake lobes 3016R (XFI)
Exhaust lobe 3725R (XER)
111 LSA
109 ICL
#34
TECH Senior Member
I was explained in my post right after yours specs are online. There are other 230/230 grinds on the market, mine uses 2 different types of lobes, that is what makes it a Reverse split.
#40
TECH Senior Member