243 heads for $500
04-17-2011, 08:54 AM
#1
TECH Apprentice
Thread Starter
243 heads for $500 i guy just emailed me back and sayed he could get me new 243 heads for 500
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
04-17-2011, 11:59 AM
#3
i guy just emailed me back and sayed he could get me new 243 heads for 500
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
04-17-2011, 01:04 PM
#5
Launching!
Join Date: Sep 2009
Location: Toronto, Ontario, Canada
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
advanced induction, suppose to be some of the best porters out there http://www.advancedinduction.com/
Trending Topics
04-18-2011, 09:15 AM
#11
Somewhere close to $1000 from what I hear. But when you think of it, $500 for the heads and $1K to get them touched up isnt too bad at all. Some guys have gained over 50 rwhp from these heads after AI's P+P
Last edited by Rare96LT1Formula; 04-18-2011 at 12:26 PM.
04-18-2011, 06:38 PM
#14
Out of curiosity, what intake are you running? I've been scratching my head forever about which intake to go with.
04-21-2011, 11:05 AM
#17
TECH Apprentice
Thread Starter
i was talking to a guy about the 243 for 500. he never got back to me. does anybody know whare i can get them for around that price 400 500. a link would be cool thanks for help.
04-21-2011, 09:27 PM
#20
Click on the Advanced Inductions link on the right side of this thread; may
have to scroll up or down to find it and then navigate your way through
their site and it shows before and after flow #'s as well as percentage of
improvement. What you'll find is that many companies can claim more peak
CFM @ .550 and .600 lift but AI has some of the best #'s in the low-lift
.200-.500 range which means good port speed , runner efficiency, and more
torque through the power band.
have to scroll up or down to find it and then navigate your way through
their site and it shows before and after flow #'s as well as percentage of
improvement. What you'll find is that many companies can claim more peak
CFM @ .550 and .600 lift but AI has some of the best #'s in the low-lift
.200-.500 range which means good port speed , runner efficiency, and more
torque through the power band.