243 heads for $500
#1
243 heads for $500
i guy just emailed me back and sayed he could get me new 243 heads for 500
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
#3
i guy just emailed me back and sayed he could get me new 243 heads for 500
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
he dident telll me if they had valves or anything. is that a good price. i was thinking of getting tfc 215. but for this price i heard that 243 are a good head as well. prob not as good as tfc 215s. thank for help.
#5
advanced induction, suppose to be some of the best porters out there http://www.advancedinduction.com/
Trending Topics
#11
Somewhere close to $1000 from what I hear. But when you think of it, $500 for the heads and $1K to get them touched up isnt too bad at all. Some guys have gained over 50 rwhp from these heads after AI's P+P
Last edited by Rare96LT1Formula; 04-18-2011 at 12:26 PM.
#14
Out of curiosity, what intake are you running? I've been scratching my head forever about which intake to go with.
#19
I bought a 2008 5.3 for 400 complete and had the 243s on it, i removed them for a set of 40$ 317s and the 243s will go on my 6.0, pretty sweet deal, 28K miles on the motor.
#20
Click on the Advanced Inductions link on the right side of this thread; may
have to scroll up or down to find it and then navigate your way through
their site and it shows before and after flow #'s as well as percentage of
improvement. What you'll find is that many companies can claim more peak
CFM @ .550 and .600 lift but AI has some of the best #'s in the low-lift
.200-.500 range which means good port speed , runner efficiency, and more
torque through the power band.
have to scroll up or down to find it and then navigate your way through
their site and it shows before and after flow #'s as well as percentage of
improvement. What you'll find is that many companies can claim more peak
CFM @ .550 and .600 lift but AI has some of the best #'s in the low-lift
.200-.500 range which means good port speed , runner efficiency, and more
torque through the power band.