Pulling the trigger tomorrow....on a cam
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well the times come to start piecing together my cam swap. I originally was set on the torquer v3 from Texas speed along with the ls6 oil pump, ls2 timing chain, cam gasket kit w/ longer arp crank bolt ect...but I ran across a cam called "the polluter" from tick performance. It's the same exact kit but it's $100 cheaper. The specs of the polluter are 24x/24x .61x/.61x 112lsa. The v3 is 231/234 .643/.598 111lsa. I've heard both produce awesome power and not just peak numbers. it's a street car only (see sig). Which cam kit would u guys go with? I drive it mainly on the weekends and I want that streetable/usable power and torque. along with the cam I'll b Pickin up a bbk ssi intake since they are $100 more than a used ls6. And I'm sending my throttle body out to be P/P... Im just worried the polluter will b too big and be a turd with in town driving even though I do have 4.10's. I will buy heads later down the road. and I'm purchasing one of these kits tomorrow so custom grind is a no no for me. hope that's enough info. Thanks.
#2
TECH Fanatic
iTrader: (20)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've got the T3 and I've been very happy with it. My car was an A4 until just recently, but since i switched to the M6 it seems like my car is always in the power band. My tune could be a little better, but i'm convinced i made the right choice.
I've also got heads on the car, but I'm very happy with my torque curve.
I've also got heads on the car, but I'm very happy with my torque curve.
#6
TECH Fanatic
iTrader: (20)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
pulls pretty hard. as i said, I,m not 100% sold on my tune, which is partially because it hasn't been on the dyno since i did the trans swap. but through a poorly designed Y, and an awful flowmaster CB, i put down 384rwhp on a mustang dyno through an unlocked A4. feels like a great streetable cam
Trending Topics
#12
TECH Fanatic
iTrader: (20)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, that's what I thought originally too. Then I talked to a few other people that had been on that dyno and they had lower numbers too. Keep in mind that mine is through a terrible exhaust setup, an UNlocked torque converter and a less than perfect tune. I needed some work to say the least
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my car made 440 rwhp and 408trq with prc 215 heads ls6 intake 36 intake and tsp headers it is a m6 car and it pulled hella hard i made the combo around auto x with a fast i would of hit 450+ easy
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, that's what I thought originally too. Then I talked to a few other people that had been on that dyno and they had lower numbers too. Keep in mind that mine is through a terrible exhaust setup, an UNlocked torque converter and a less than perfect tune. I needed some work to say the least
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
got ur pm btw, replied to it
#20
Launching!
iTrader: (21)
Join Date: Apr 2006
Location: Parma, Oh
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The polluter runs good on the street and can seem mild depending on the tune. If it's not a DD go big. You already have the gear for it too. Nothing like doing all that work and wishing you went bigger like a lot do. Then again you could also wish you didn't go so big.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)