Silver_Bullet_Z28

What Lifters should I get for a head swap? 2000 z28 with a 224/228 .581 .588 112lsa cam, hardened chromoly pushrods and comp 918 springs as far as internals go on it but right now it still has stock 853's and I have a pair of 241's out to the side I'm gonna get ported and polished and very small mill job but I don't know what lifters I need to get with them? Any suggestions and links greatly appreciated. Thanks in advance -Alex

alexus6798

iTrader: (24)

LS7 lifters should do fine.

Sales1@Texas-speed

LS7 lifter set would be my recommendation for your build.

MonmouthCtyLS7

iTrader: (6)

Another LS7 vote

speedtigger

iTrader: (16)

Got a wicked noisy set of LS7 lifters. Will be looking for something better next time I have the heads off.

99Bluz28

iTrader: (35)

You'll probably be fine with the LS7 lifters, but the CompCams 850-16 is a good option.
http://www.ws6project.com/user_stor/...oller-lifters/

dr_whigham

iTrader: (49)

I run the LS7's with no issue at all.

PREDATOR-Z

Those are what i've been using for now over 6 years with no issues. .050>.080 range preload

BKsNHRA

iTrader: (4)

My ls7 lifters are doin fine

MonmouthCtyLS7

iTrader: (6)

Same here...if the build is done correctly you should be fine, pick up some LS2 lifter trays also.

hiltsy855

iTrader: (35)

I was told in this thread that those Comp lifters are basically LS7 lifters.

J Glen

I see a lot of people saying "should" in their post. The simple fact is they are working fine in some motors, but are failing in others. Get a nice set of lifters that will give you a better peace of mind.

99Bluz28

iTrader: (35)

It's possible, but all I see is speculation; no facts.
IMO, get the best you can afford that's appropriate for you build.