What CAM is this????
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 66
Likes: 0
From: Houston, TX
What CAM is this???? I just got my cam package in today...The cam itself has rust pits on it, and the box it cam it says 13/06/02 on it....like its been siting for a while...
The numbers on the cam are...as they apear on the cam..
1.3:20(and then an upside down U) 11:00B
05902 08002
In between each cylinder intake and exaust setup there is yellow paint. ( 4 spaces with paint total)
Can anyone name this cam? I hope?
The numbers on the cam are...as they apear on the cam..
1.3:20(and then an upside down U) 11:00B
05902 08002
In between each cylinder intake and exaust setup there is yellow paint. ( 4 spaces with paint total)
Can anyone name this cam? I hope?
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 66
Likes: 0
From: Houston, TX
Also... i forgot to menchon...there is a blue/burnt color on the sides of the lobes.....
Originally Posted by Dueledaily
I just got my cam package in today...The cam itself has rust pits on it, and the box it cam it says 13/06/02 on it....like its been siting for a while...
The numbers on the cam are...as they apear on the cam..
1.3:20(and then an upside down U) 11:00B
05902 08002
In between each cylinder intake and exaust setup there is yellow paint. ( 4 spaces with paint total)
Can anyone name this cam? I hope?
The numbers on the cam are...as they apear on the cam..
1.3:20(and then an upside down U) 11:00B
05902 08002
In between each cylinder intake and exaust setup there is yellow paint. ( 4 spaces with paint total)
Can anyone name this cam? I hope?
Trending Topics
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
The blue color is from the heat treating. You might be able to match it up by the lift numbers, but you would need a dial caliper to first measure the base circle, then measure the difference at the lobe (1/4 turn from base circle measurement) and subtract it. That will be your lobe lift, multiply that by 1.7 and thats your valve lift.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 66
Likes: 0
From: Houston, TX
I ordered the cam from SDPC. The rust on the cam came off after scratching it. But I still can imagin that they would have this cam sitting on shelves long enough to get rust on the camshaft. I though their was a chance they sent me the wrong cam. I ordered the hot cam kit and was trying to see if anyone knew what a hotcam looked like.
Originally Posted by 99-LS1-SS
Take a pic of it and post it. People can give you a better idea of the condition of the cam. Take close ups of the area's you are curious about.
Originally Posted by Dueledaily
I ordered the cam from SDPC. The rust on the cam came off after scratching it. But I still can imagin that they would have this cam sitting on shelves long enough to get rust on the camshaft. I though their was a chance they sent me the wrong cam. I ordered the hot cam kit and was trying to see if anyone knew what a hotcam looked like.
kevin check your mail.
