New cams from Tick Performance
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
You will be part of the selection process. Having customer input on driving habits, usage and intended purpose of the vehicle is more than 50% of my decision making process involving the camshaft profile chosen.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
I'm probably gonna jump into a Spec clutch per his advice. not that im gonna religiously beat the snot out of my car...but yaknow...i'd like to not have to worry about smoking it either...
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
Thanks guys!
In case anyone missed the thread I posted in the dyno section, here is a 2005 C6 LS2 that Northshore Auto Clinc in Slidell, LA installed a V.2 LS2 Polluter cam in. Full bolt on car with stock cam that was replaced with the V.2 Polluter(239/244 .624/.595 111+2) and then re dyno tested to record the gains.
It was cold outside so the air was really good!
In case anyone missed the thread I posted in the dyno section, here is a 2005 C6 LS2 that Northshore Auto Clinc in Slidell, LA installed a V.2 LS2 Polluter cam in. Full bolt on car with stock cam that was replaced with the V.2 Polluter(239/244 .624/.595 111+2) and then re dyno tested to record the gains.
It was cold outside so the air was really good!
hey martin tried sending you an email but I guess my yahoo mail is acting up. im going to be running the polluter V.2 cam 112lsa in my set up (stock rotating assembly and pistons) and was wondering if you could tell me when the inlet valve closes ABDC, as im trying to figure out my dynamic CR.... Got your email thanks martin
Last edited by matt99; Feb 23, 2014 at 08:51 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Jun 2007
Posts: 48
Likes: 0
Street Heat Stage1 V2 Hi Martin,
I received an email saying Tick released a new version of the Street Heat Stage 1 cam...The V2. Can you go into a bit more detail on this new cam? Any installs yet and performance gains. Thanks Dan
I received an email saying Tick released a new version of the Street Heat Stage 1 cam...The V2. Can you go into a bit more detail on this new cam? Any installs yet and performance gains. Thanks Dan
On The Tree
Joined: Apr 2012
Posts: 154
Likes: 0
just a quick question on this cam. do you think i'll have any issues with PTV using stock decked block and 317 heads? i believe my cam i ended up with is these specs, but at 113+3. i not at home at the moment to confirm.
... Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
Guys I really have to apologize here. I am very behind on my emails.
Please don't think I am ignoring you, I am trying my best to get to everyone I possibly can as fast as I possibly can.
If anyone has the ability to call the shop that has sent an email that has gone unanswered please call me to discuss your needs.
Again, I deeply apologize and I hate to see you guys have to wait on me. I'm not that special LOL!
Please don't think I am ignoring you, I am trying my best to get to everyone I possibly can as fast as I possibly can.
If anyone has the ability to call the shop that has sent an email that has gone unanswered please call me to discuss your needs.
Again, I deeply apologize and I hate to see you guys have to wait on me. I'm not that special LOL!
Teching In
Joined: Jan 2009
Posts: 9
Likes: 0
Guys I really have to apologize here. I am very behind on my emails.
Please don't think I am ignoring you, I am trying my best to get to everyone I possibly can as fast as I possibly can.
If anyone has the ability to call the shop that has sent an email that has gone unanswered please call me to discuss your needs.
Again, I deeply apologize and I hate to see you guys have to wait on me. I'm not that special LOL!
Please don't think I am ignoring you, I am trying my best to get to everyone I possibly can as fast as I possibly can.
If anyone has the ability to call the shop that has sent an email that has gone unanswered please call me to discuss your needs.
Again, I deeply apologize and I hate to see you guys have to wait on me. I'm not that special LOL!
I emailed you and faxed my custom grind form but haven't heard back. Between work/school/time zones it's pretty much impossible for me to call you guys during business hours, BUT I also understand you guys are a functioning garage and not a call center so I don't feel "ignored" in the slightest. I JUST WANT MY CAM!! lol i feel like a dope fiend
Last edited by strugglinsteve; Feb 27, 2014 at 03:32 PM.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
I emailed you and faxed my custom grind form but haven't heard back. Between work/school/time zones it's pretty much impossible for me to call you guys during business hours, BUT I also understand you guys are a functioning garage and not a call center so I don't feel "ignored" in the slightest. I JUST WANT MY CAM!! lol i feel like a dope fiend
Teching In
Joined: Jan 2009
Posts: 9
Likes: 0