Advanced Induction unresponsive?
#21
With my dogbox transmission builder, I gave him %50 down, he collected all the parts and built the transmission. When I sent him the final payment, BAM, it shipped out. Isn't that how it is supposed to go?
If someone doesn't send the final payment, the company has the down payment money, and the parts.... right??
If someone doesn't send the final payment, the company has the down payment money, and the parts.... right??
#22
TECH Resident
iTrader: (3)
Join Date: Mar 2008
Location: Joliet Illinois
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that's a long time to have to wait. They must be crazy busy. I agree I would think with the down payment they would start the work then when you paid it off it should be shipped out thts they way I would think it would go.
What's the set up you are going to have?
What's the set up you are going to have?
#23
Yeah that's a long time to have to wait. They must be crazy busy. I agree I would think with the down payment they would start the work then when you paid it off it should be shipped out thts they way I would think it would go.
What's the set up you are going to have?
What's the set up you are going to have?
If it ever shows up,
Ai 218ccCNC GM 5.3L Cylinder Head Package:
GM's 5.3L LS1 head casting is one of the most commonly available GM castings out there. At only 15cc over
stock volume this particular port sees gains of over 50cfm on the intake utilizing a factory GM 2.00" valve.
Typical gains over an as-cast 241 are in the 35-45rwhp range on a stock 346cid short block.
Package Includes:
- New GM 12578925 Castings Not Imported Copies
- Manley RaceFlo SS Valves 11360 2.000" Intake/11361 1.550" Exhaust
- BTR Dual Spring Kit - .650" Capable w/ Titanium Retainers
- 100% CNC Ported Intake/Exhaust/Chambers
- 100% CNC Competition Valvejob
- PCD Milled to Desired Chamber Volume
-Ai Custom HR Cam Billet Core With Ai CamPro QC Document
-Hardened 4130CrMoly 1pc Racing Pushrod 5/16" x .080 Wall x 7.xxx (3/8" Req. Machining Clearance)
-GM 12589226 LS1/LS6 5.7L Head Gasket (1998-2004) 3.920 max bore .051 Thk Compressed
-ARP 134-3609 LS Head Bolt Kit 1998-2003 Model Yrs
-CompCams 15956-16 Limited Travel Tie Bar LS Racing Hydraulic Roller Lifters
-13702-Kit LS Roller Bearing Trunion Kit + Installation in customer supplied rockers
Should be good, everyone else seems to think it will be, again, if in a couple weeks he isn't still waiting to get a cam a month after I paid fully.
Don't have a clue what size cam I am getting, but I guess it isn't normal.
#25
#28
http://advancedinduction.com/LSX/AiLSxBilletCams.php
Nope, it looks like they might not have known what they were going to give me or something. I don't really understand why it took 3+ WEEKS to order the cam AFTER final payment, not like I sneaked up on them with a big crazy order out of nowhere... Doesn't look like he is even sure it's on its way to him for quality check yet.
#31
10 Second Club
iTrader: (41)
Sounds about right from AI. I wouldnt give them my business if they were the last head porters on earth. In a nutshell...Phil is a POS and if you see this Phil, up yours.
You got the original thread deleted because your a paying sponsor but looks like you didnt get out of this one yet.
https://ls1tech.com/forums/ls1tech-s...-my-heads.html
You got the original thread deleted because your a paying sponsor but looks like you didnt get out of this one yet.
https://ls1tech.com/forums/ls1tech-s...-my-heads.html
#32
10 Second Club
iTrader: (41)
This is why I went with TEA and I couldnt be happier. Screw AI.
Take care...
#33
TECH Junkie
iTrader: (1)
Really? Yea thats because they get the bad stuff about them deleted. Your a mod, you should be able to look at my old thread about me and another sellers thread where AI f-ed up. Of course they got it deleted. Just like they will probably have this deleted.
This is why I went with TEA and I couldnt be happier. Screw AI.
Take care...
This is why I went with TEA and I couldnt be happier. Screw AI.
Take care...
#34
The Scammer Hammer
iTrader: (49)
senical I remember the thread clear as day. It wasn't deleted to hide anything. It was deleted b/c it no longer served it's purpose. At all.
My comment was directed at the results of the heads themselves, not someone having customer service issues with used heads that couldn't be worked, and needing to pay for AI's time and expense to tell you such.
Let's go back to arguing about ram air....
My comment was directed at the results of the heads themselves, not someone having customer service issues with used heads that couldn't be worked, and needing to pay for AI's time and expense to tell you such.
Let's go back to arguing about ram air....
#35
10 Second Club
iTrader: (41)
I know you, the dude you bought heads from, and the OP seem to be having some problems but the results do speak for themselves Joe. Theres no way AI dyno result threads get screened when they dont make power.. From an outsider looking in, you ran the risk when getting used heads plain and simple. AI wasnt exactly right in their stance but it all worked out in the end didnt it?
Go ahead. Stick up for the big sponsor all you want. I expected it. I expect others to as well. People will continue to suck the sponsors *** until it happens to them!
All I know is if YOU where in my shoes when this happened you would understand and have the same viewpoint.
I posted my experience now have fun.....
#36
10 Second Club
iTrader: (41)
senical I remember the thread clear as day. It wasn't deleted to hide anything. It was deleted b/c it no longer served it's purpose. At all.
My comment was directed at the results of the heads themselves, not someone having customer service issues with used heads that couldn't be worked, and needing to pay for AI's time and expense to tell you such.
Let's go back to arguing about ram air....
My comment was directed at the results of the heads themselves, not someone having customer service issues with used heads that couldn't be worked, and needing to pay for AI's time and expense to tell you such.
Let's go back to arguing about ram air....
LOL ssra FTW!
I'll agree to disagree. With you saying you dont know of 1 person who is not happy with them, that gives the wrong impression to people looking for opinions. Deleting the thread hides the fact that AI is shady and it hid what I had to say leading to everyone saying "oh ai is great iv never heard anything bad" ha!
No no no. HAHAHA this is what im talking about. You dont have the whole picture because it did not happen to YOU.
I really didnt care to get into this like we are. I simply wanted to POST MY EXPERIENCE AND BE DONE.
Does AI do good work? Yes
Would I give them my business? Hell no
Take care...
#38
On The Tree
iTrader: (3)
Join Date: May 2010
Location: Ga
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Wow. You just dont get the picture. Did I say they did bad work or anything about product? They do fine with product. I was simply weighing in on my experience with them. You or anyone else will not get the picture because you didnt have the emails in your maibox, they did not have YOUR money, they didnt try to get in the middle of YOUR deal with anyone else (trying to make money), YOU didnt get charged on thier invoice for "2 pictures/emails", YOU dont have the timelines where everything happened, Phil didnt call YOU a liar... ect ect ect
Go ahead. Stick up for the big sponsor all you want. I expected it. I expect others to as well. People will continue to suck the sponsors *** until it happens to them!
All I know is if YOU where in my shoes when this happened you would understand and have the same viewpoint.
I posted my experience now have fun.....
Go ahead. Stick up for the big sponsor all you want. I expected it. I expect others to as well. People will continue to suck the sponsors *** until it happens to them!
All I know is if YOU where in my shoes when this happened you would understand and have the same viewpoint.
I posted my experience now have fun.....
#39
The Scammer Hammer
iTrader: (49)
We'll keep it on topic after this post, but it was there. All 7 pages of it. It turned into a complete cluster **** of biblical proportions. You had naysayers on one side and nut swingers on the other. It's constructiveness went out the window quick.
Anyways, best of luck OP. I know it sucks, and you and others may be turned off in the future, but you picked one of the best stock casting head porters in the country. I'm sure everything will come to light come tomorrow.
Anyways, best of luck OP. I know it sucks, and you and others may be turned off in the future, but you picked one of the best stock casting head porters in the country. I'm sure everything will come to light come tomorrow.
#40
Super Hulk Smash
iTrader: (7)
Sending in parts to any vendor to be worked makes me cringe. One mix up and you'll be screwed or at least severely inconvenienced and set back in schedule quite a bit. I don't like that chance. In this case there was none of that involved, but still the company is built around that principle and that worries me.