PP heads droped valve pictures inside
#1
PP heads droped valve pictures inside
well here they are you can easly see that the valve stem in still in the head with spring and retainers still intact
http://www.fandsracing.com/Dsc01631.jpg
http://www.fandsracing.com/Dsc01632.jpg
http://www.fandsracing.com/Dsc01633.jpg
http://www.fandsracing.com/Dsc01634.jpg
http://www.fandsracing.com/Dsc01635.jpg
http://www.fandsracing.com/Dsc01636.jpg
http://www.fandsracing.com/Dsc01631.jpg
http://www.fandsracing.com/Dsc01632.jpg
http://www.fandsracing.com/Dsc01633.jpg
http://www.fandsracing.com/Dsc01634.jpg
http://www.fandsracing.com/Dsc01635.jpg
http://www.fandsracing.com/Dsc01636.jpg
#5
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Holy **** dude that ******* suck. I would ask PP to pay for the hole thing. Did you put the vavles in or did they. If they did they are responsible for checking and inspecting the vavle for anykind of defects.
#7
TECH Senior Member
iTrader: (21)
Damn........ makes me think................ with all these problems latley from patriot does anyone know if a valve is a valve and if i can just order another set of valves for $200 from someone like APE or Thunder and just replace them before mine crap out of my $5k shortblock........???????????????????
Trending Topics
#8
TECH Junkie
Join Date: Dec 2001
Location: Lakeland, FL
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
you gotta make sure the valve seats the same so the design would have to be the same I would think. doesn't pp use manley or ferrera valves though? Maybe that valve was a stocker cause those get pressed together I think.
#9
11 Second Club
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
* I want to make a disclaimer here... The first set of patriot heads I had.. the valves failed in them. The ends were soft and they "Mushroomed". You can do a search under my username and find where I had that trouble. EVERY set of heads that I ran after that, I insisted that REV, or Ferrera valves were installed in my heads. There have been SEVERAL people PM'ing me asking if I've had a failure with the patriot heads I've ran in the past. I DID have a valve (several of them) fail on the first set, after that I used a quality valve (non patriot brand) in my other heads. This is firsthand information from MY car and the heads that I ran on them. I wouldn't install the "patriot" brand valves in my lawn mower and I HATE mowing grass. I've installed probably 25 or 30 sets of patriot heads on cars locally.. and I made DAMN sure that they had the "upgraded" valve option.
#10
TECH Senior Member
iTrader: (21)
Im not sure what brand valve they use..... i heard they use a $2 valve...... but his heads **** the bead in 30 miles and mine ran for 700 miles on my other motor and 2400 miles so far on this new APE motor on boost......... I think for my peace of mind ill be selling these heads and going with a set of APE race heads so i can sleep at night..... at least they have a warranty.
#11
Originally Posted by NA$TY-TA
Damn........ makes me think................ with all these problems latley from patriot does anyone know if a valve is a valve and if i can just order another set of valves for $200 from someone like APE or Thunder and just replace them before mine crap out of my $5k shortblock........???????????????????
Not sure whos valves PP uses but if you get new ones just becareful because one shops 3 angle valve job isnt always exactly the same as another shops.
#12
TECH Senior Member
iTrader: (21)
Originally Posted by gomer
* I want to make a disclaimer here... The first set of patriot heads I had.. the valves failed in them. The ends were soft and they "Mushroomed". You can do a search under my username and find where I had that trouble. EVERY set of heads that I ran after that, I insisted that REV, or Ferrera valves were installed in my heads. There have been SEVERAL people PM'ing me asking if I've had a failure with the patriot heads I've ran in the past. I DID have a valve (several of them) fail on the first set, after that I used a quality valve (non patriot brand) in my other heads. This is firsthand information from MY car and the heads that I ran on them. I wouldn't install the "patriot" brand valves in my lawn mower and I HATE mowing grass. I've installed probably 25 or 30 sets of patriot heads on cars locally.. and I made DAMN sure that they had the "upgraded" valve option.
Well thanks for telling us all AFTER the fact *******............. push there **** and then as soon as u ............. what the hell its not even worth saying........
#13
11 Second Club
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NA$TY-TA
Well thanks for telling us all AFTER the fact *******............. push there **** and then as soon as u ............. what the hell its not even worth saying........
#14
TECH Junkie
Join Date: Dec 2001
Location: Lakeland, FL
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
hey nasty why not try a set of those afrs hehehee, might be able to kick up the boost a little bit more with those bad boys. If Patriot does not use the good vavles I would switch them out before its too late. Nothing like swapping shortblocks to ruin 6 months of your life.
#15
10 Second Club
iTrader: (15)
Join Date: May 2004
Location: Minnesota
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2000TAguy
nope not cool at all it trashed most every thing that motor had maybe 30 miles on it that what you get with 2 dollar valves made in zimbobway or some ****
I am not the smartest car guy around but isn't 30 miles, 6500 rpms and a burnout box a bad combination on a new motor or head springs?
I am not trying to offend you just asking, don't take this the wrong way...
Them pics are nasty....thinking about pulling mine off this winter..
#17
10 Second Club
iTrader: (15)
Join Date: May 2004
Location: Minnesota
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WinMan
nice catch speedo, i was wondering the same thing
https://ls1tech.com/forums/generation-iii-internal-engine/218054-no-oil-preasure.html
#18
TECH Senior Member
iTrader: (21)
Originally Posted by Mike K.
hey nasty why not try a set of those afrs hehehee, might be able to kick up the boost a little bit more with those bad boys. If Patriot does not use the good vavles I would switch them out before its too late. Nothing like swapping shortblocks to ruin 6 months of your life.
ha ha (laughs inside)........... man..... it isnt as fun taking it out as it is going in........... It just really bothers me that people who pimped these products from day one and all along the products that were used (Terry) and still let them be sold to people who worked so very hard for there money................ We will see what i do..... man i might park the car and let it sit till Jan. until tax return time comes and get a new set.
#19
TECH Veteran
iTrader: (6)
Originally Posted by NA$TY-TA
Well thanks for telling us all AFTER the fact *******............. push there **** and then as soon as u ............. what the hell its not even worth saying........
dude...thats not needed.......
Patriot has just had too many problems that I won't have anything to do with them (wouldn't use them as paper weights or door stops)......
first it was valves, then valve springs and retainers, and finally valve seats that were over cut and could fall out........
unfortunately I know why people still use them.......like any product there are those who do too much "bad mouthing" and it comes off as ranting and then those who are so devoted to a company that they will push to have the "bad feelings" covered up......then add in that because they are built cheap they can be sold cheap so there will always be people who try to "save a buck".......
#20
i put the motor in and ran it at cruise week at the beach then track passes i had about 10or 12 passes on it when it happened
the car does not get street driven normaily
beside it is built with good parts and put together right you really do not need much time on a motor to run it hard a few heat cycles and you are good to go
think about this what about guys that have trailer queens drag only cars what do they do ?
they build a motor and go run it
the car does not get street driven normaily
beside it is built with good parts and put together right you really do not need much time on a motor to run it hard a few heat cycles and you are good to go
think about this what about guys that have trailer queens drag only cars what do they do ?
they build a motor and go run it