Factory LS1 camshaft......??
Originally Posted by cyphur_traq
you can send it to me, i'll cover shipping costs. I'm starting a collection 
Trending Topics
TECH Regular
Joined: Sep 2004
Posts: 404
Likes: 0
From: Raleigh, NC
I hate to give away my ideas but might try this. If you have underdrive pulley's use your stock pulley and cam to make a lamp. 2 bolts and 2 washers will secure the cam to the pulley as the base. I cleared the cam, gloss black on the pulley, and bought a lamp kit at wal-mart for like $10. Since the cam is hollow it is perfect. Heaviest lamp I own.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by 2xLS1
Are you serious? I have one in the trash right now (2000) I could dig out. I've thrown quite a few out.
Originally Posted by Cstick
I hate to give away my ideas but might try this. If you have underdrive pulley's use your stock pulley and cam to make a lamp. 2 bolts and 2 washers will secure the cam to the pulley as the base. I cleared the cam, gloss black on the pulley, and bought a lamp kit at wal-mart for like $10. Since the cam is hollow it is perfect. Heaviest lamp I own.
, all you need is that shortblock glass table and your set 
Originally Posted by Cstick
I hate to give away my ideas but might try this. If you have underdrive pulley's use your stock pulley and cam to make a lamp. 2 bolts and 2 washers will secure the cam to the pulley as the base. I cleared the cam, gloss black on the pulley, and bought a lamp kit at wal-mart for like $10. Since the cam is hollow it is perfect. Heaviest lamp I own.
Originally Posted by Bluehawk27
Well if you are in a smog **** area just make yourself a two piece timing cover and keep it to swap it out for smog checks.
My stock cam is sitting on my computer desk. Kinda a reminder of that weekend battling with dual valvesprings.
Patriot Gold springs
Me 