Anyone running the CheaTR H/C?
Thread Starter
11 Second Club
iTrader: (2)
Joined: Dec 2005
Posts: 114
Likes: 0
From: Winchester, VA
Anyone running the CheaTR H/C? I am thinking about sticking Thunder Racing's CheaTR setup on the T/A. I'm either going to do just the cam or the H/C that uses AFR 205 heads. I am curious what kind of track results you guys are seeing out of it. And what kind of street manners and idle quality it has. Does it really behave like stock?
TECH Resident
Joined: Jul 2005
Posts: 907
Likes: 1
From: NJ
Originally Posted by fasteddie94
I am thinking about sticking Thunder Racing's CheaTR setup on the T/A. I'm either going to do just the cam or the H/C that uses AFR 205 heads. I am curious what kind of track results you guys are seeing out of it. And what kind of street manners and idle quality it has. Does it really behave like stock?
Teching In
Joined: Aug 2003
Posts: 23
Likes: 0
I have the CheatR cam with Patriot 243 ported heads and stock intake and exhaust manifolds on my 03 vette 6speed. Puts out 378 RWHP and 369 RWTQ. Idle sounds like stock and drives like stock. LS6 + performance was what I was looking for and now have.
Last edited by Bob25thTA; Dec 30, 2006 at 01:53 PM.
TECH Resident
Joined: Jul 2005
Posts: 907
Likes: 1
From: NJ
Originally Posted by fasteddie94
anybdy know what kind of power you'll get out of it with LT's? I already have the bolt on stuff.
Bob- you have any track times on it?
Bob- you have any track times on it?
11 Second Club
Joined: May 2004
Posts: 229
Likes: 0
From: Troy,MI.
Originally Posted by Bob25thTA
I have the CheatR cam with Patriot 243 ported heads and stock intake and exhaust manifolds on my 03 vette 6speed. Puts out 375 RWHP and 358 RWTQ. Idle sounds like stock and drives like stock. LS6 + performance was what I was looking for and now have.
Thread Starter
11 Second Club
iTrader: (2)
Joined: Dec 2005
Posts: 114
Likes: 0
From: Winchester, VA
well what other grind would be better suited? I still want to keep the sleeper approach. There is really no need for a bunch of lope with this car. It's pretty much a daily driver and we take the kids for rides in it fairly often.
Trending Topics
11 Second Club
Joined: May 2004
Posts: 229
Likes: 0
From: Troy,MI.
Originally Posted by fasteddie94
well what other grind would be better suited? I still want to keep the sleeper approach. There is really no need for a bunch of lope with this car. It's pretty much a daily driver and we take the kids for rides in it fairly often.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Teching In
Joined: Aug 2003
Posts: 23
Likes: 0
Originally Posted by YankeeVert.
Are you running the stock C.R. or did you mill the heads ? Do you have a underdrive pulley?
Originally Posted by fasteddie94
anybdy know what kind of power you'll get out of it with LT's? I already have the bolt on stuff.
I went a little different with my CheaTR cam. I am running a Fast 90/90 with Dynatech Longtubes, Off Road Y and Magnaflow catback. Before suspension mods in sig, i ran a best of 12.23 @ 115 on a 1.97 60ft out here in hawaii. Car also dynoed 401/375. I am in the process of adding an UD pulley and shopping for cylinder heads. Should be fun. Oh yeah, and car has hardly been tuned at all and runs exceptional.