What is causing this noise? (Sound clip within)
#1
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Over the last few weeks I have I have had some engine noise and it seems to be getting worse. After listening around with a stethoscope I have isolated the noise to the front part of the engine above and behind the crank pulley. The noise come and goes.
The link below is to a sound file (1.3mb). The engine is cold. This is the first minute of runtime. The mic is about 2 feet below the front of the engine. As the engine warms the sound pitch changes but it is still there.
Engine sound
What do you think is making this sound?
Thanks
John
<small>[ April 28, 2002, 08:29 PM: Message edited by: JNorris ]</small>
The link below is to a sound file (1.3mb). The engine is cold. This is the first minute of runtime. The mic is about 2 feet below the front of the engine. As the engine warms the sound pitch changes but it is still there.
Engine sound
What do you think is making this sound?
Thanks
John
<small>[ April 28, 2002, 08:29 PM: Message edited by: JNorris ]</small>
#2
Administrator
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No idea what this noise is. I have heard this coming from my engine as well. It only happens when it's cold, like you said. Once it warmed up, I'd rev it up a bit and it would go away. I was worried at first, but now I just chalk it up to her being cold blooded! I shiver in the cold too...
#3
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well, I think that the noise is coming from a bad (noisy, pressure is fine according to the dash gauge) oil pump or timing chain/gear problem. As much as the car has been driven if the problem was crankshaft related it should have broken by now.
Are my ideas sound?
Are my ideas sound?
#4
TECH Apprentice
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a sound similar from under my car too. I noticed it after getting a really bad tank of gas from Exxon at Bay Area Blvd and FM528. My engine started pinging really bad so I got gas somewhere else. Pinging went away but now the noise has surfaced. Hope I didn't loose a rod bearing. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> My oil pressure has not changed as of yet.
<small>[ April 28, 2002, 09:16 PM: Message edited by: RacerX ]</small>
<small>[ April 28, 2002, 09:16 PM: Message edited by: RacerX ]</small>
#5
TECH Fanatic
Join Date: Nov 2001
Location: Iowa :-/~
Posts: 1,705
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't know about the high pitch wine but am I the only one that hears that knock? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
#6
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Oh yes I hear it every day! <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> The knock/tap is the noise I am talking about. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
John
<small>[ April 28, 2002, 09:35 PM: Message edited by: JNorris ]</small>
John
<small>[ April 28, 2002, 09:35 PM: Message edited by: JNorris ]</small>
#7
TECH Apprentice
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JNorris:
<strong>Oh yes I hear it every day! <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> The knock/tap is the noise I am talking about. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
The whine is the AIR pump.
John</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Let me know what you find. I would be interested in seeing what mine is as well.
<strong>Oh yes I hear it every day! <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> The knock/tap is the noise I am talking about. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
The whine is the AIR pump.
John</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Let me know what you find. I would be interested in seeing what mine is as well.
Trending Topics
#9
TECH Apprentice
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Plan B:
<strong>Piston Slap!</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">So is this common? Are the pistons really too small for the bore? What kinda wear problem is this? <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />
<strong>Piston Slap!</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">So is this common? Are the pistons really too small for the bore? What kinda wear problem is this? <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />
#11
TECH Apprentice
iTrader: (1)
Join Date: Jan 2002
Location: Walker, LA
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That didn't sound like an injector to me. Sounded bottom end related to me. I've got 'the slap thing' happenen but it's not that loud. Just my .02
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
John,
I get it to. My '99 SS had it also. Now i have a 2002 WS6. My noise seems to come from the front of the motor, but around or behind the water pump. But i still get the piston slap noise in the mornings. Hope it's nothing serious.
Den
I get it to. My '99 SS had it also. Now i have a 2002 WS6. My noise seems to come from the front of the motor, but around or behind the water pump. But i still get the piston slap noise in the mornings. Hope it's nothing serious.
Den
#14
TECH Enthusiast
Join Date: Nov 2001
Location: Henderson, NV
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
cant download the clip because im at school on their computers. BUT IS THE NOISE ALMOST LIKE IT SOUND LIKE DETONATION. Weird because i was going to post the same darn question later today.
when- motor cold
sound- tat tat tat like a fingernail on a table
and it goes away when its hot.
when- motor cold
sound- tat tat tat like a fingernail on a table
and it goes away when its hot.
#15
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the replies guys. Sorry I have not responded sooner but was out of town for the past few days at a location that did not have any phone lines.
I was thinking piston slap but the sound is so loud behind the timing chain cover/water pump I just don’t think it completely caused but piston slap.
I was also thinking injectors but I have unplugged one injector at a time with no reduction in noise. However the noise is timed with injector firing.
Can a bad oil pump or timing chain/gear make this type of sound?
Thanks
John
I was thinking piston slap but the sound is so loud behind the timing chain cover/water pump I just don’t think it completely caused but piston slap.
I was also thinking injectors but I have unplugged one injector at a time with no reduction in noise. However the noise is timed with injector firing.
Can a bad oil pump or timing chain/gear make this type of sound?
Thanks
John
#16
TECH Regular
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
John...did you first hear this noise when you put the MAC headers on your car? I have a 99 and just put the MACs on mine and I hear this noise everyday now..I went to a local shop hear in Dallas and they "thought" it was the EGR flutter valve and piston slap...
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My 98 Z has sounded like that every morning since I bought it, noise usually goes away after a minute or so, it gets really loud after about 2000rpm, dealer said it was piston slap.
#19
TECH Apprentice
Join Date: Nov 2001
Location: Lexington, KY
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do you have a pulley on the car? I had a problem with an ASP pulley that wasn't properly balanced. The outer rim, which "floats" on a rubber pad, was moving around when we watched the pulley. The sound was very similar to what you're hearing. Watch the pulley for any odd movement. I switched back to stock and that solved the problem. Then I bought a new ASP and it was fine.
#20
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
PewterZ- After the MAC headers I could hear more engine noises but I do not think I heard this sound. I might try removing the EGR and see if I still hear it.
Unfortunately the noise does not go away after the car is warmed up, just the tone/pitch changes.
Go FasTA- Yes I do have a MTI (ASP?) pulley on the car. I removed the drive belts and cranked the car and the noise was still there but was not as bad. I will try the stock pulley.
Thanks
John
Unfortunately the noise does not go away after the car is warmed up, just the tone/pitch changes.
Go FasTA- Yes I do have a MTI (ASP?) pulley on the car. I removed the drive belts and cranked the car and the noise was still there but was not as bad. I will try the stock pulley.
Thanks
John