Stroker labor?
You got my PM.
And my buddy will probably install your engine into the car at his dealership after hours. I'll have to ask him what he'll charge. He's gonna be installing my engine when its done. He works on tons of LT1/LS1 F-Body's in this area, I'm sure the GTO will be cake too............his new engine is at that same shop right now getting put together.
.
And my buddy will probably install your engine into the car at his dealership after hours. I'll have to ask him what he'll charge. He's gonna be installing my engine when its done. He works on tons of LT1/LS1 F-Body's in this area, I'm sure the GTO will be cake too............his new engine is at that same shop right now getting put together.
.
Where are you getting the work done? I am still trying to find a place to build my 425 without raping me.
The best price I found from a Pro shop was TEC - Total Engine Concepts; I talked to Mike, the owner, he was a great guy to talk to and spent over an hour on the phone with me. I've talked to about 5 different shops from Tampa to here in Jax and Mike's shop in WPB was the best in price BY FAR!
It's been a few months since I've talked to him since school is raping me, but I've no doubt they are still the best $$$ around. They are a TOP END shop so hit them up
561-842-2813
http://totalengineconcepts.com/aboutus.php
DM
The best price I found from a Pro shop was TEC - Total Engine Concepts; I talked to Mike, the owner, he was a great guy to talk to and spent over an hour on the phone with me. I've talked to about 5 different shops from Tampa to here in Jax and Mike's shop in WPB was the best in price BY FAR!
It's been a few months since I've talked to him since school is raping me, but I've no doubt they are still the best $$$ around. They are a TOP END shop so hit them up
561-842-2813
http://totalengineconcepts.com/aboutus.php
DM
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo disassemble
hottank
magflux
line hone
deck
cylinder bore tq plate
fly cut
clearance
balance rotating
assembly of LB
Now you can save money like $100 if you disassemble the block yourself and some stuff may not need to be done, like a line hone, but if you talk to Mike he will fill you in.
DM
Not here in Florida Bro! Hell, some places wanted to charge me $2800 for all the above.
DM
Thread Starter
Teching In
Joined: Sep 2010
Posts: 46
Likes: 0
From: Ft.Lauderdale, FL
I just looked over my list and for the following labor it was around $1526-/+
disassemble
hottank
magflux
line hone
deck
cylinder bore tq plate
fly cut
clearance
balance rotating
assembly of LB
Now you can save money like $100 if you disassemble the block yourself and some stuff may not need to be done, like a line hone, but if you talk to Mike he will fill you in.
DM
Not here in Florida Bro! Hell, some places wanted to charge me $2800 for all the above.
DM
disassemble
hottank
magflux
line hone
deck
cylinder bore tq plate
fly cut
clearance
balance rotating
assembly of LB
Now you can save money like $100 if you disassemble the block yourself and some stuff may not need to be done, like a line hone, but if you talk to Mike he will fill you in.
DM
Not here in Florida Bro! Hell, some places wanted to charge me $2800 for all the above.
DM
