Holley valve covers.....which coils??
#1
Holley valve covers.....which coils??
I was looking at the Holley valve covers and I was wondering if anybody knew what coils they would fit. It says ls3 style with 72mm bolt spacing, but I need to run truck coils for my efi system. Does truck coils have the same bolt spacing as ls3 coils??
http://holley.com/241-91.asp
Has anybody used these valve covers before?
http://holley.com/241-91.asp
Has anybody used these valve covers before?
#2
10 Second Club
iTrader: (9)
there brand new to the market so you probably wont find to many people using them yet.
why do you have to use truck coils? makes no sense to me you should be able to swap them at will, even if the pins are different you can splice the ends of the harness to each coil to accept any type
why do you have to use truck coils? makes no sense to me you should be able to swap them at will, even if the pins are different you can splice the ends of the harness to each coil to accept any type
Trending Topics
#9
Angled coil mounts deliver a smooth clean look
Retain the high-tech look and performance of “coil on cover”
Eliminates unsightly OE style coil brackets
Four finishes available (Natural Cast, Satin, Black Krinkle & Polished)
Billet aluminum oil fill cap
Reuses original gaskets and bolts
Fits all LS engines using LS3 or similar coils with 72mm bolt spacing
Clearance for .750” lift cam with stock style rocker arms
Holley’s LS covers utilize proven OE style baffles and vents.
#11
10 Second Club
iTrader: (30)
The LS1 coils and D585 truck coils are not going to work with these covers. The LS1's have slightly less bolt spacing for the holes, and the D585 coils have a completely different mounting pattern which you will need the bracket to come with, and those will not bolt to the Holley's.
Need to find LS2, 3, 7 coils with 72mm bolt spacing.
Need to find LS2, 3, 7 coils with 72mm bolt spacing.
#12
TECH Fanatic
iTrader: (45)
well i ordered a set back when then came out the first week of october, still waiting on them to come in. Holley apparently makes them as the orders come because they dont keep a supply on hand, thats at least what i was told. and i will let you know how i have to mod these to work with LS1 coils. Because when i ordered them i thought they worked with all LS coils, but i misread that one. So on that note, i guess i will find out if i can make them work with LS1 coils!
#14
#15
TECH Enthusiast
iTrader: (11)
Join Date: Aug 2009
Location: Michigan
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
The LS1 coils and D585 truck coils are not going to work with these covers. The LS1's have slightly less bolt spacing for the holes, and the D585 coils have a completely different mounting pattern which you will need the bracket to come with, and those will not bolt to the Holley's.
Need to find LS2, 3, 7 coils with 72mm bolt spacing.
Need to find LS2, 3, 7 coils with 72mm bolt spacing.
...and what would I do with my pcv valve since on my truck it is in the back of the driver's side cover and there is no opening for it on these?
Could I run one of the external ones from the early ls's?
#19
TECH Enthusiast
iTrader: (11)
Join Date: Aug 2009
Location: Michigan
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
where did you order them from, if you don't mind me asking... I've been looking at teamc website, at either “as cast“, or satin... Saw a recommend for them on corvetteforum and the prices are very cheap!
But I hear these covers are taking awhile to get out to distributors...?
Please post up photos of yours when you receive them! I'd like to see the underside.
But I hear these covers are taking awhile to get out to distributors...?
Please post up photos of yours when you receive them! I'd like to see the underside.