Which Ls3 Cam?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think i'm having problems with current cam and was looking at these cams.
My current set-up is.
Stock bottom end L92
.20 milled heads ls3 valves and smoothed
240/248 .608/612 114lsa old grind comp cam
ported intake and NW92mm tb
Tsp 17/8 headers
powerbond pulley
Lunati 233/247 .577/.597 114lsa
TSP 231/236 .641/615 111lsa
Comp 231/247 .617/624 113lsa
vengence 231/243 .617/624 115+3
My current set-up is.
Stock bottom end L92
.20 milled heads ls3 valves and smoothed
240/248 .608/612 114lsa old grind comp cam
ported intake and NW92mm tb
Tsp 17/8 headers
powerbond pulley
Lunati 233/247 .577/.597 114lsa
TSP 231/236 .641/615 111lsa
Comp 231/247 .617/624 113lsa
vengence 231/243 .617/624 115+3
Last edited by raymond mckinney; 11-14-2009 at 03:57 PM.
#2
Moderator
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You're choosing TSP's largest cam (I think) but if you look at the graph's for each one (3 cams) they are so close in power.
I do like the TSP one but I would get it on a 112.
There are 230/234 LS3 cams (Spin's) on CF breaking 500rwhp so you don't need to over do it with LS3's.
I do like the TSP one but I would get it on a 112.
There are 230/234 LS3 cams (Spin's) on CF breaking 500rwhp so you don't need to over do it with LS3's.
#6
TECH Fanatic
iTrader: (9)
Join Date: Mar 2004
Location: Pasadena Texas
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Get a custom ground cam. Call Ed Curtis at FTI he has some 92 headed cars making good power. The key with these heads is to keep the low rpm torque, that is what makes the 92's special. My cam is in the 240's and 620's
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think the cam is your problem. Are you having valve float? Maybe a bad spring?
Trending Topics
#9
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I do have one graph. I'll try and put it up for you guys. And the torque is low also. I don't know what else really to try and fix the problem. Almost feels as the motor is pushing air back into the intake manifold at 5000 rpm's and up. Tuner said my kpa was 90-94??
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
what happened to the g5x3 in your profile? Different car? I agree with the above posts that your problem does not seem to be the cam itself, but if you want to change cams then that is your decision.
I worked on a local car that had a g6x3 from LGM on a set of L92 heads and made really good power. From what Louis said at LGM the g6x3 had increased intake lift and duration (versus the g5x3) to take advantage of the LS3/L92 port design
I worked on a local car that had a g6x3 from LGM on a set of L92 heads and made really good power. From what Louis said at LGM the g6x3 had increased intake lift and duration (versus the g5x3) to take advantage of the LS3/L92 port design
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My son's TBSS has similar problems, after he changed the heads and cam it barely runs what it did stock. I think maybe the springs are too strong and might be collapsing the stock lifters above .500 lift. We'll know pretty soon as i bought a set of LS-2 Morel lifters and he has installed them. It should be back together by next week, weather permitting.
#15
On The Tree
Join Date: Dec 2007
Location: akron ohio
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
specs
230 intake on a xfi lobe 612 lift
234 exhaust on a xer lobe 598 lift
114 lsa with 2 degrees advance so 114+2
liknk to thread
http://forums.corvetteforum.com/c6-t...right-now.html
link to video
http://www.youtube.com/watch?v=IfDzSjVn508
fast forward the vid to about half way
Last edited by redsap05; 11-18-2009 at 08:04 PM.
#18
On The Tree
Join Date: Dec 2007
Location: akron ohio
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You just call comp cams directly and have it custom ground and give them these exact specs. Iam going to put in my Ls2 as well. Good luck and keep us updated.
230 intake duration on an XFI lobe .612 lift
234 exhaust duration on an XER lobe .598 lift
114 lobe separation angle
2 degrees advance ground in
Comp cams: call and ask to have a custom cam ground (400 bucks) and give them those specs.
230 intake duration on an XFI lobe .612 lift
234 exhaust duration on an XER lobe .598 lift
114 lobe separation angle
2 degrees advance ground in
Comp cams: call and ask to have a custom cam ground (400 bucks) and give them those specs.