Ported LS7 Flow numbers
Ported LS7 Flow numbers I had Jay Riddle Racing (non-sponsor link removed by Admin) hand finish my GM LS7 heads. Based on what so many people have said, I was hesitant to have anyone touch the superb GM factory casting, with regards to porting and such. After consulting with Jay, and based on his years of experience with high performance heads, he was confident he could really wake these up. Needless to say, I was very surprised and pleased with the results. Cant wait to hit the rollers and the track. This is on a resleeved 5.3 L alum block, 4.100 x 4.00 422". We also went through the whole motor, and hand crafted the pistons to accomodate the 12* heads, and offset guide spacing.
4.100 bore flowed at true 28" vacuum.
intake
lift ported stock ported w ported intake
.100 77 69 n/a
.200 162 166 n/a
.300 259 245 259
.400 314 299 307
.500 352 340 326
.600 376 362 347
.650 386 360 356
.670 388 n/a 363
.700 392 360 367
exhaust (flowed reverse through kooks 1 7/8 header)
lift ported
.100 58
.200 121
.300 167
.400 208
.500 243
.600 252
.650 256
4.100 bore flowed at true 28" vacuum.
intake
lift ported stock ported w ported intake
.100 77 69 n/a
.200 162 166 n/a
.300 259 245 259
.400 314 299 307
.500 352 340 326
.600 376 362 347
.650 386 360 356
.670 388 n/a 363
.700 392 360 367
exhaust (flowed reverse through kooks 1 7/8 header)
lift ported
.100 58
.200 121
.300 167
.400 208
.500 243
.600 252
.650 256
Originally Posted by Greg Fell
I had Jay @ Jay Riddle Racing (www.jayriddleracing.com) hand finish my GM LS7 heads. Based on what so many people have said, I was hesitant to have anyone touch the superb GM factory casting, with regards to porting and such. After consulting with Jay, and based on his years of experience with high performance heads, he was confident he could really wake these up. Needless to say, I was very surprised and pleased with the results. Cant wait to hit the rollers and the track. This is on a resleeved 5.3 L alum block, 4.100 x 4.00 422". We also went through the whole motor, and hand crafted the pistons to accomodate the 12* heads, and offset guide spacing.
4.100 bore flowed at true 28" vacuum.
intake
lift ported stock ported w ported intake
.100 77 69 n/a
.200 162 166 n/a
.300 259 245 259
.400 314 299 307
.500 352 340 326
.600 376 362 347
.650 386 360 356
.670 388 n/a 363
.700 392 360 367
exhaust (flowed reverse through kooks 1 7/8 header)
lift ported
.100 58
.200 121
.300 167
.400 208
.500 243
.600 252
.650 256
4.100 bore flowed at true 28" vacuum.
intake
lift ported stock ported w ported intake
.100 77 69 n/a
.200 162 166 n/a
.300 259 245 259
.400 314 299 307
.500 352 340 326
.600 376 362 347
.650 386 360 356
.670 388 n/a 363
.700 392 360 367
exhaust (flowed reverse through kooks 1 7/8 header)
lift ported
.100 58
.200 121
.300 167
.400 208
.500 243
.600 252
.650 256
, i wish i had a 4.100 bore, damn 4.030 bore. The heads have been out for 6 months+. The block is a standard resleeved block, they are $2500-3000 or so.
I'll have to ask on the bill. I haven't really even seen it yet *gulp*!!!!
We're looking into doing a sheet metal intake, and possibly an ITB set up. These manifolds really hold these motors back from big power.
I'll have to ask on the bill. I haven't really even seen it yet *gulp*!!!!
We're looking into doing a sheet metal intake, and possibly an ITB set up. These manifolds really hold these motors back from big power.
Trending Topics
Wow, from one head porter to any other, tell him I said hats off. I have yet to see an LS7 casting in person, but they sure look impressive in pictures. Be sure and post up some pics of yours when you get them back.
Brandon
Brandon
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Mar 2006
Posts: 7
Likes: 0
From: Vancleave, Ms.
Originally Posted by Greg Fell
The heads have been out for 6 months+. The block is a standard resleeved block, they are $2500-3000 or so.
I'll have to ask on the bill. I haven't really even seen it yet *gulp*!!!!
We're looking into doing a sheet metal intake, and possibly an ITB set up. These manifolds really hold these motors back from big power.
I'll have to ask on the bill. I haven't really even seen it yet *gulp*!!!!
We're looking into doing a sheet metal intake, and possibly an ITB set up. These manifolds really hold these motors back from big power.
Last edited by Mean lx; Apr 28, 2006 at 10:04 PM. Reason: Can't spell for shiite!
On The Tree
Joined: Aug 2005
Posts: 132
Likes: 0
Originally Posted by Mean lx
Honestly, they don't flow too bad considering their design. The numbers look great through both the heads and intake. It's not a super victor carbed intake flowing 400, but 367 cfm through the heads and intake is pretty impressive. I just bought a set of these heads and was considering having someone touch them up. I also plan on building a resleeved LS2 block. I plan on putting some decent power to the ground in my 02 vette. James
I'm VERY curious to see what the Warhawk LS7X flow now... The exhaust "looks" to be even better from what I've read... I'll post the numbers as soon as I get a set... Should be interesting.
Teching In
Joined: Mar 2006
Posts: 7
Likes: 0
From: Vancleave, Ms.
Originally Posted by Dune-LS1
I'm VERY curious to see what the Warhawk LS7X flow now... The exhaust "looks" to be even better from what I've read... I'll post the numbers as soon as I get a set... Should be interesting.
Where the 2 pieces mate together, 'required' (he he he) smoothing and such. There were ridges in them. Also, the injector bosses were not very consistent from one cyl to the other, they needed massaged also. Finally, since I milled the heads .040, the nipple/locator dealios on either side of the manifold required some clearancing.
Update....the car is ALIVE! Started right up... quiet valvetrain (aggresive cam), 50+ psi hot at idle, man am I happy.
Update....the car is ALIVE! Started right up...
quiet valvetrain (aggresive cam), 50+ psi hot at idle, man am I happy.