who built your ls2 402ci & how is it performong?
#1
who built your ls2 402ci & how is it performong?
i'm doing some research now because i'm going to make the ls2 402ci swap in a matter of months. i would like to know...
#1 who did you get your motor through?
#2 how is it running around town and at the strip?
#3 what crank,pistons and rods did you get?
#4 what heads,headers and cam if you don't mind telling the cam?
#5 what are the #'s (jet or stang dyno)
at this point i'm looking at the rapid motorsports ls2 402 long block.what do you think of this product?
i see some post saying ls2 402ci down on power,so i'm starting my reasearch now so it dont happen to me.i know it's alot of questions but anyone who will take the time to help,THANKS ALOT.
mike c.
#1 who did you get your motor through?
#2 how is it running around town and at the strip?
#3 what crank,pistons and rods did you get?
#4 what heads,headers and cam if you don't mind telling the cam?
#5 what are the #'s (jet or stang dyno)
at this point i'm looking at the rapid motorsports ls2 402 long block.what do you think of this product?
i see some post saying ls2 402ci down on power,so i'm starting my reasearch now so it dont happen to me.i know it's alot of questions but anyone who will take the time to help,THANKS ALOT.
mike c.
#2
10 Second Club
iTrader: (15)
Join Date: Nov 2001
Location: St. Michael, MN.
Posts: 4,519
Likes: 0
Received 0 Likes
on
0 Posts
#1 who did you get your motor through?
SDPC shortblock, I assembled and installed the longblock.
#2 how is it running around town and at the strip?
Runs great around town, no track times yet.
#3 what crank,pistons and rods did you get?
Diamond pistons, Crower rods and Eagle crank.
#4 what heads,headers and cam if you don't mind telling the cam?
AFR 225's, QTP 1-7/8" and 3" Y, Rapid 244/250 cam.
#5 what are the #'s (jet or stang dyno)
No dyno numbers yet.
Rapid builds killer 402's that are proven to put down big numbers.
SDPC shortblock, I assembled and installed the longblock.
#2 how is it running around town and at the strip?
Runs great around town, no track times yet.
#3 what crank,pistons and rods did you get?
Diamond pistons, Crower rods and Eagle crank.
#4 what heads,headers and cam if you don't mind telling the cam?
AFR 225's, QTP 1-7/8" and 3" Y, Rapid 244/250 cam.
#5 what are the #'s (jet or stang dyno)
No dyno numbers yet.
Rapid builds killer 402's that are proven to put down big numbers.
#4
11 Second Club
iTrader: (38)
Join Date: Mar 2004
Location: ct.
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
#1 SDPC
#2 Runs Great around town, no track times yet
#3 eagle crank, diamond pistons, crower rods
#4 Afr 205's, Kooks 1 3/4" and 3" y with cats, tsp ms3 cam, Fast 90/90
#5 On a dyno jet I made 471rwhp 440 rwtq through a locked a4 at 10.9.1 compression
I feel with bigger cam and some induction work I should beable to get real close to 500 rwhp.
#2 Runs Great around town, no track times yet
#3 eagle crank, diamond pistons, crower rods
#4 Afr 205's, Kooks 1 3/4" and 3" y with cats, tsp ms3 cam, Fast 90/90
#5 On a dyno jet I made 471rwhp 440 rwtq through a locked a4 at 10.9.1 compression
I feel with bigger cam and some induction work I should beable to get real close to 500 rwhp.
#6
Check out this vid i found.
Now thats some power.
http://www.thevettedoctors.com/video...rls2-steve.wmv
Now thats some power.
http://www.thevettedoctors.com/video...rls2-steve.wmv
#7
11 Second Club
iTrader: (38)
Join Date: Mar 2004
Location: ct.
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rambo benson
Gman may I askwhat are the approx. specs on your cam?
Hey I am really interesed to know if someone dynos both with and without FASt 90/90 too!
Hey I am really interesed to know if someone dynos both with and without FASt 90/90 too!
Ms3 237/242 .603"/.609" 113 lsa
Trending Topics
#9
11 Second Club
iTrader: (38)
Join Date: Mar 2004
Location: ct.
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Basically this is the same set up I had on my stock bottom end ls1 before I blew the motor. The heads have been milled to 61cc and work good on the motor. Where my set up lacks is in the cam and in the induction. The 75mm lid and maf need to be upgraded to 85mm and my intake needs to be ported. I actually gained 10hp on the dyno just by descreening the maf. Once I upgrade these last few parts I am hoping for 500 rwhp.
#10
9 Second Club
iTrader: (18)
Join Date: Nov 2002
Location: Indiana
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
1. W2W Shortblock, I assembled and installed complete motor.
2. On the street the car runs great, 10.69 @ 133 1.60 60' 100 Shot at the track. Should be low 10's with a better 60'.
3. Mahle Pistons, Callies Crank, Callies Compstar Rods
4. TSP/Patroit Hand Finished 59cc LS6 Style Heads, Kooks 1 7/8 Headers, TSP Texas Giant Cam 248/254 .622/.614
5. First dyno was 485RWHP/440RWTQ, but I have worked on the tuning at the strip and have ran consisantly in the 10's. Probally around 510/480 range NA.
2. On the street the car runs great, 10.69 @ 133 1.60 60' 100 Shot at the track. Should be low 10's with a better 60'.
3. Mahle Pistons, Callies Crank, Callies Compstar Rods
4. TSP/Patroit Hand Finished 59cc LS6 Style Heads, Kooks 1 7/8 Headers, TSP Texas Giant Cam 248/254 .622/.614
5. First dyno was 485RWHP/440RWTQ, but I have worked on the tuning at the strip and have ran consisantly in the 10's. Probally around 510/480 range NA.
#11
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mike c.
i'm doing some research now because i'm going to make the ls2 402ci swap in a matter of months. i would like to know...
#1 who did you get your motor through?
EAST SIDE PERFORMANCE!!
#2 how is it running around town and at the strip?
MORE OF A STRIP GUY, BUT SO FAR SO GOOD ON BOTH ENDS
#3 what crank,pistons and rods did you get?
EAGLE,DIMOND CUSTOMS,LUNATI
#4 what heads,headers and cam if you don't mind telling the cam?
AFR, KOOKS, ESP N2O CAM
#5 what are the #'s (jet or stang dyno)
DYNO MEANS NOTHING, BUT I JUST WENT 9.3 @ 144 FIRST PASSES ON THE CAR TODAY! 250 WORTH OF SPRAY
at this point i'm looking at the rapid motorsports ls2 402 long block.what do you think of this product?
i see some post saying ls2 402ci down on power,so i'm starting my reasearch now so it dont happen to me.i know it's alot of questions but anyone who will take the time to help,THANKS ALOT.
mike c.
#1 who did you get your motor through?
EAST SIDE PERFORMANCE!!
#2 how is it running around town and at the strip?
MORE OF A STRIP GUY, BUT SO FAR SO GOOD ON BOTH ENDS
#3 what crank,pistons and rods did you get?
EAGLE,DIMOND CUSTOMS,LUNATI
#4 what heads,headers and cam if you don't mind telling the cam?
AFR, KOOKS, ESP N2O CAM
#5 what are the #'s (jet or stang dyno)
DYNO MEANS NOTHING, BUT I JUST WENT 9.3 @ 144 FIRST PASSES ON THE CAR TODAY! 250 WORTH OF SPRAY
at this point i'm looking at the rapid motorsports ls2 402 long block.what do you think of this product?
i see some post saying ls2 402ci down on power,so i'm starting my reasearch now so it dont happen to me.i know it's alot of questions but anyone who will take the time to help,THANKS ALOT.
mike c.
#12
TECH Regular
Join Date: Sep 2005
Location: 415 Northern CA
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z06kern
1. W2W Shortblock, I assembled and installed complete motor.
2. On the street the car runs great, 10.69 @ 133 1.60 60' 100 Shot at the track. Should be low 10's with a better 60'.
3. Mahle Pistons, Callies Crank, Callies Compstar Rods
4. TSP/Patroit Hand Finished 59cc LS6 Style Heads, Kooks 1 7/8 Headers, TSP Texas Giant Cam 248/254 .622/.614
5. First dyno was 485RWHP/440RWTQ, but I have worked on the tuning at the strip and have ran consisantly in the 10's. Probally around 510/480 range NA.
2. On the street the car runs great, 10.69 @ 133 1.60 60' 100 Shot at the track. Should be low 10's with a better 60'.
3. Mahle Pistons, Callies Crank, Callies Compstar Rods
4. TSP/Patroit Hand Finished 59cc LS6 Style Heads, Kooks 1 7/8 Headers, TSP Texas Giant Cam 248/254 .622/.614
5. First dyno was 485RWHP/440RWTQ, but I have worked on the tuning at the strip and have ran consisantly in the 10's. Probally around 510/480 range NA.
I bet all your friends are jelous. Which head gaskets did you end up going with?
#15
I'll answer for my friend who doesn't post on here.
#1 who did you get your motor through?
SDPC shortblock, MTI Racing assembled it.
#2 how is it running around town and at the strip?
Runs awesome especially with the 3.90s out back..
#3 what crank,pistons and rods did you get?
Mahle pistons, Compstar rods and Callies crank.
#4 what heads,headers and cam if you don't mind telling the cam?
Stage 3 LS6s, SW 1 3/4" headers, MTI custom cam(~240/245)
#5 what are the #'s (jet or stang dyno)
Dynojet: 480rwhp/467rwtq
#1 who did you get your motor through?
SDPC shortblock, MTI Racing assembled it.
#2 how is it running around town and at the strip?
Runs awesome especially with the 3.90s out back..
#3 what crank,pistons and rods did you get?
Mahle pistons, Compstar rods and Callies crank.
#4 what heads,headers and cam if you don't mind telling the cam?
Stage 3 LS6s, SW 1 3/4" headers, MTI custom cam(~240/245)
#5 what are the #'s (jet or stang dyno)
Dynojet: 480rwhp/467rwtq
#17
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mike c.
would anyone trust the eagle crank in the 402 block? some say eagle is JUNK and some say it's just fine. any in put????????
#18
Teching In
iTrader: (1)
Join Date: Mar 2006
Location: hinesville, ga
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
new 402 questions
i am putting a 402 in my 98 ta and got a couple questions just wondering how and what you did with the knock sensors n also what one you think would better high compression or low compression for a dual stage 250 shot on a 402.
thanks
thanks
#19
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by electric_ta
i am putting a 402 in my 98 ta and got a couple questions just wondering how and what you did with the knock sensors n also what one you think would better high compression or low compression for a dual stage 250 shot on a 402.
thanks
thanks
#20
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Lee County, FL
Posts: 895
Likes: 0
Received 0 Likes
on
0 Posts
#1 who did you get your motor through? SDPC
#2 how is it running around town and at the strip? Great
#3 what crank,pistons and rods did you get? Eagle, Diamond, don't remember
#4 what heads,headers and cam if you don't mind telling the cam? AFR, Kooks, 232/238 115
#5 what are the #'s (jet or stang dyno) 621RWHP/571RWTQ SAE daily driver tune, pump gas
Good luck!
#2 how is it running around town and at the strip? Great
#3 what crank,pistons and rods did you get? Eagle, Diamond, don't remember
#4 what heads,headers and cam if you don't mind telling the cam? AFR, Kooks, 232/238 115
#5 what are the #'s (jet or stang dyno) 621RWHP/571RWTQ SAE daily driver tune, pump gas
Good luck!