L92 head 427 makes 700HP n/a!
#81
TECH Addict
iTrader: (22)
Ok i am running Comp SP and RP solid roller lobes with GM Cadillac race hydraulic lifters. The lobes are 252* and 260*@.050"on a 111* LSA the rockers are stock and net lift is .660"/.647" My pushrods are .080" 5/16's My springs are the Ferrea duals with 170 seat and 480 open lbs. You realli think thats enough spring to deflect these pushrods?
#82
FormerVendor
Thread Starter
Join Date: Jan 2002
Location: Mpls., MN
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the 5/16" pushrods are inadequate for your app. A set of 3/8" x .080" wall pushrods will work wonders as will modifying the rockers w/ the Harland Sharp bearing and trunion upgrade. With these parts (along with an unspecified beehive spring) I have been able to spin my stock eliminator engines to 8200+ without valve float.
#83
oK WHAT RPM are you turning with no spring surge or seat bounce?
#84
Yes, the 5/16" pushrods are inadequate for your app. A set of 3/8" x .080" wall pushrods will work wonders as will modifying the rockers w/ the Harland Sharp bearing and trunion upgrade. With these parts (along with an unspecified beehive spring) I have been able to spin my stock eliminator engines to 8200+ without valve float.
HELP?