Thorley Header Project Update
#1181
TECH Enthusiast
Join Date: Jul 2008
Location: Atlanta Georgia USA
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
have a look see here:
![](http://pic70.picturetrail.com/VOL1874/11648276/21295614/352666456.jpg)
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#1182
TECH Fanatic
iTrader: (5)
Join Date: Jul 2008
Location: Yellowknife NT Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yeah it needs to have the numbers right side up
have a look see here:
This is upside down and that point at the bottom is exactly where the "nipple" sticks out at and as you can see their gasket is worth 2 dead flies!
I think they only show this TBS like this to only just stand it up! LoL!! But that confused a lot of LS4 guys on the TBS thread!
have a look see here:
![](http://pic70.picturetrail.com/VOL1874/11648276/21295614/352666456.jpg)
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#1183
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Are we thinking it's the TBS with the whistle/exhaust noise??? I've got one as well that was mocked up from a speed shop where I used to live that had a CNC machine, so it's not one of the ones that have been talked about here on this site. So let me know when you change your's and if there's any dfference....
#1184
TECH Fanatic
iTrader: (5)
Join Date: Jul 2008
Location: Yellowknife NT Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So William,
Are we thinking it's the TBS with the whistle/exhaust noise??? I've got one as well that was mocked up from a speed shop where I used to live that had a CNC machine, so it's not one of the ones that have been talked about here on this site. So let me know when you change your's and if there's any dfference....
Are we thinking it's the TBS with the whistle/exhaust noise??? I've got one as well that was mocked up from a speed shop where I used to live that had a CNC machine, so it's not one of the ones that have been talked about here on this site. So let me know when you change your's and if there's any dfference....
#1185
TECH Fanatic
iTrader: (5)
Join Date: Jul 2008
Location: Yellowknife NT Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Okay so I removed the TBS and still makes the whistle, I took the car back to get the clamp tighten by the flex pipe, still whistles.....everyone tells me its normal, headers with make that noise, but does it?
#1187
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#1189
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know I didn't. I took the word of Chevy that these are reusable up to 5 times.... Maybe was something I shouldn't have done. Probably should have replaced them... Gonna suck if it turns out that these need to be replaced!!!!! All this work all over again!!!!! YUCK!!!!!!!!
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#1190
TECH Fanatic
iTrader: (5)
Join Date: Jul 2008
Location: Yellowknife NT Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I reused the stock gaskets, im going to cut my thick moving blanket and wrap it around the flex pipe tomorrow to see it muffles the sound, if it does im going to call DTH and send up new downpipe collector.
#1191
TECH Fanatic
iTrader: (6)
Join Date: Jan 2007
Location: Ain't tellin'
Posts: 1,406
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know some guys replaced thier gaskets and didn't get this sound. I am just throwing this out there. I do not know for sure if this is the case.
GS,
If it is the gaskets I would try to slide the old gasket out and then slide the new one in bracing the header up somehow. I would at least try this before pulling it all apart again.
-Mike
GS,
If it is the gaskets I would try to slide the old gasket out and then slide the new one in bracing the header up somehow. I would at least try this before pulling it all apart again.
-Mike
#1193
Launching!
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I used stock gaskets as well. I've had a header leak before at the gasket and could hear a ticking noise at idle, but nothing like that here. I could see it being the flex, let me know how you make out with the blanket William. Good idea. I've got sh*t weather here so might not be able to look into till next week. Probably will run it to my mechanic.
If it's a common thing can Thorley's look into it with Buickracer's car. I haven't heard if he's even had his installed yet. Thorley will be doing the install won't they?
If it's a common thing can Thorley's look into it with Buickracer's car. I haven't heard if he's even had his installed yet. Thorley will be doing the install won't they?
#1194
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know some guys replaced thier gaskets and didn't get this sound. I am just throwing this out there. I do not know for sure if this is the case.
GS,
If it is the gaskets I would try to slide the old gasket out and then slide the new one in bracing the header up somehow. I would at least try this before pulling it all apart again.
-Mike
GS,
If it is the gaskets I would try to slide the old gasket out and then slide the new one in bracing the header up somehow. I would at least try this before pulling it all apart again.
-Mike
#1198
TECH Enthusiast
Join Date: Jul 2008
Location: Atlanta Georgia USA
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It might be the flex pipe....I remember having full SLP exhaust on my 03 Monte and it sounding like it had an exhaust leak as well,...but overtime it decreased! IDK WTF happen in that situation!! LoL!! But it was the flex pipe. I wonder if its the collectors...
#1199
TECH Fanatic
iTrader: (5)
Join Date: Jul 2008
Location: Yellowknife NT Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I looked at the band clamp,and its uneven (by the flex) so borrowed my friend 3/8 drive rachet and will tighten that bitch clamp in the afternoon....wish me luck.