HKE LS3/L92 Shortblock (Callies/Wiseco)-Greg Good LS3/L92 Heads (Xceldyne/Ferrea/PP)
09-27-2008, 07:03 AM
#1
HKE LS3/L92 Shortblock (Callies/Wiseco)-Greg Good LS3/L92 Heads (Xceldyne/Ferrea/PP) All the parts below ONLY have (10) 1/4 mile passes on them, no street use.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
Other Components:
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” Camshaft - $330
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 171.
Payment: I accept Paypal, money orders, cashier's checks, Wester Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping. Shipping will be determine upon location.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
Other Components:
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” Camshaft - $330
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 171.
Payment: I accept Paypal, money orders, cashier's checks, Wester Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping. Shipping will be determine upon location.
Last edited by Dragaholic; 11-09-2008 at 02:33 PM.
10-05-2008, 04:30 PM
#7
Because I no longer have the time to race anymore, due to working so many hours. So I decided to part out the car.
~13 to 1 with LS7 head gaskets and 67cc combustion chambers. With a thicker head gasket and bigger chambers, this can be reduced.
~13 to 1 with LS7 head gaskets and 67cc combustion chambers. With a thicker head gasket and bigger chambers, this can be reduced.
Trending Topics
10-22-2008, 05:02 PM
#8
*HUGE 2000 Camaro SS Drag Car Part Out Sale. Performance & Stock Parts Within* Below is a list of the available parts. If you do not see what you're looking for, I do not have it. Please do not ask me about parts not listed below.
Condition of parts: If there's an asterik (*) next to the part, it means that it's practically new with only (10) 1/4 mile passes on it. The rest of the parts are in excellent/new like condition.
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 171.
Payment: I accept Paypal, money orders, cashier's checks, Western Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping.
Prices: No low balling, trades, bashing, and please, do not reference prices to Ebay. If you have any comments, opinions, or suggestions, please PM me. There's no need for a discussion, debate, or war on my parts for sale. So please, let's keep this clean.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
*Morel Hydraulic Lifters - $420
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” 112 Camshaft - $330
Oil system:
*Star Vacuum Pump w/Adjustable Regulator, Mounting Bracket, Drive Pulley, Pump Pulley, Mandrel, & Belt - $890
*Moroso Vacuum Pump Breather Tank - $65
Fuel:
Racetronix Fuel System - $200
Ignition/Electrical:
Dyna-Batt/Odyssey Battery - $135
Coil Pack Relocation Kit - $100
Drivetrain/Transmission:
Protorque Torque Converter (TH350) - $850
Suspension & Chassis:
BMR Upper A-Arms (Red) - $210
QA1 Hal 275 Lb. Coil Springs - $100
Spohn Chromoly Adjustable Lower Control Arms w/Spherical Rod Ends & Offset Spacers (Red) - $230
Wolfe Racecraft Sway/Drag Bar (Black) - $300
Interior & Safety:
RJS Black 5-point Camlock Harness - $115
*Autometer Ultimate II Tachometer $525
Wheels & Tires:
*Hoosier Radial Slicks 30x10.5x15 - $390
McGard Front & Rear Lugnuts - $85
Stock Parts:
Camaro Rear Bench Seat - Portion that your back rests on only, cloth (tweed like material), 2-tone (light gray/dark gray), new/excellent condition, etc. $40 + shipping.
IAC Sensor - $50 shipped
Starter - $100 shipped
A/C condenser - $100 shipped
HVAC ducting (for vents) - $20 shipped
Brake master cylinder - $80 shipped
Brake booster - $100 shipped
Rear brake rotors - $50 shipped
Rear brake hoses - $35 shipped
Wheel hubs w/speed sensors - $200
Air pump bracket - $15 shipped
Lifters - $60 shipped
Rear seat belts (ebony/black) - $60 shipped
Monsoon amp - $80 shipped
Passenger airbag bracket - $15 shipped
Panhard bar - $30 shipped
Upper a-arms - $70 shipped
Wiper motor/linkage - $90 shipped
Wiper blades – $10 shipped
Rear bumper support - $75 shipped
Condition of parts: If there's an asterik (*) next to the part, it means that it's practically new with only (10) 1/4 mile passes on it. The rest of the parts are in excellent/new like condition.
Feedback: I have 100% positive feedback here on the board and on Ebay (i8asvt), with a combined score count of 171.
Payment: I accept Paypal, money orders, cashier's checks, Western Union, Moneygram, etc., with Paypal being the preferred payment. If you choose to use Paypal for payment, you must send as an instant transfer or an e-Check. No credit card payments.
Shipping: Prices do not include shipping.
Prices: No low balling, trades, bashing, and please, do not reference prices to Ebay. If you have any comments, opinions, or suggestions, please PM me. There's no need for a discussion, debate, or war on my parts for sale. So please, let's keep this clean.
Engine:
*GM LS3/L92 Aluminum Block
*Callies Dragonslayer 4” Stroke Crankshaft
*Callies Connecting Rods
*Wiseco Custom 9.6cc Dome Pistons
*Wiseco Custom Pins
*Wiseco GF Piston Rings
*Federal Mogul Main Bearings
*Federal Mogul Cam Bearings
*ACL HB Coated Rod Bearings
*ARP Main Stud Kit
*ARP 2000 Series Rod Bolts
Shortblock: Block honed, line honed, deck set with pistons, balanced, and assembled by Erik Koenig of HKE Racing Engines $4,925
Cylinder heads/Valvetrain:
*Greg Good Fully Ported/Polished LS3/L92 Cylinder Heads (New Castings) w/Xceldyne Titanium Intake Valves, Ferrea Hollow Stem Exhaust Valves, Custom Spring Seats, Patriot Gold Extreme Dual Spring Kit, & 67cc Combustion Chambers - $2975
*Morel Hydraulic Lifters - $420
*Manton Restricted Pushrods - $170
*HKE Custom 254/266 .650”/.650” 112 Camshaft - $330
Oil system:
*Star Vacuum Pump w/Adjustable Regulator, Mounting Bracket, Drive Pulley, Pump Pulley, Mandrel, & Belt - $890
*Moroso Vacuum Pump Breather Tank - $65
Fuel:
Racetronix Fuel System - $200
Ignition/Electrical:
Dyna-Batt/Odyssey Battery - $135
Coil Pack Relocation Kit - $100
Drivetrain/Transmission:
Protorque Torque Converter (TH350) - $850
Suspension & Chassis:
BMR Upper A-Arms (Red) - $210
QA1 Hal 275 Lb. Coil Springs - $100
Spohn Chromoly Adjustable Lower Control Arms w/Spherical Rod Ends & Offset Spacers (Red) - $230
Wolfe Racecraft Sway/Drag Bar (Black) - $300
Interior & Safety:
RJS Black 5-point Camlock Harness - $115
*Autometer Ultimate II Tachometer $525
Wheels & Tires:
*Hoosier Radial Slicks 30x10.5x15 - $390
McGard Front & Rear Lugnuts - $85
Stock Parts:
Camaro Rear Bench Seat - Portion that your back rests on only, cloth (tweed like material), 2-tone (light gray/dark gray), new/excellent condition, etc. $40 + shipping.
IAC Sensor - $50 shipped
Starter - $100 shipped
A/C condenser - $100 shipped
HVAC ducting (for vents) - $20 shipped
Brake master cylinder - $80 shipped
Brake booster - $100 shipped
Rear brake rotors - $50 shipped
Rear brake hoses - $35 shipped
Wheel hubs w/speed sensors - $200
Air pump bracket - $15 shipped
Lifters - $60 shipped
Rear seat belts (ebony/black) - $60 shipped
Monsoon amp - $80 shipped
Passenger airbag bracket - $15 shipped
Panhard bar - $30 shipped
Upper a-arms - $70 shipped
Wiper motor/linkage - $90 shipped
Wiper blades – $10 shipped
Rear bumper support - $75 shipped
Last edited by Dragaholic; 11-14-2008 at 10:25 AM.
10-27-2008, 09:11 AM
#13
99LSS1, it's a homemade kit. It comes with everything but the wires.
Those inquiring about the Bogarts, pics can be viewed in the links below.
http://i28.photobucket.com/albums/c2...CamaroSS13.jpg
http://i28.photobucket.com/albums/c2...CamaroSS12.jpg
http://i28.photobucket.com/albums/c2.../CamaroSS8.jpg
http://i28.photobucket.com/albums/c2.../CamaroSS7.jpg
Those inquiring about the Bogarts, pics can be viewed in the links below.
http://i28.photobucket.com/albums/c2...CamaroSS13.jpg
http://i28.photobucket.com/albums/c2...CamaroSS12.jpg
http://i28.photobucket.com/albums/c2.../CamaroSS8.jpg
http://i28.photobucket.com/albums/c2.../CamaroSS7.jpg
10-27-2008, 09:43 AM
#14
12 Second Club
iTrader: (26)
Join Date: Sep 2004
Location: Liberty, MO
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
Bump for a great seller, been some time ago but I took a set of Bogarts off his hands and they were exactly as stated when they arrived. Wish I had the money to play with I'd have that motor in and set my current setup aside 
