Summit Universal X-Pipe Kits
#1
On The Tree
Thread Starter
Join Date: Jul 2007
Location: northeast Iowa
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Summit Universal X-Pipe Kits
How difficult would it be to install a Summit® Universal X-Pipe Kits on a camaro with pacesetter lt headers?
http://store.summitracing.com/partde...5&autoview=sku
or
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
or
http://store.summitracing.com/partde...5&autoview=sku
Last edited by Black96Z; 12-20-2008 at 08:45 PM.
#2
11 Second Club
iTrader: (20)
Join Date: Aug 2006
Location: Oviedo,Fl/Fairbanks,AK
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
the links dont work man. but anyways its not hard at all man. i have pacesetter LTs with a summit 3in xpipe kit on my car. heres a few pics of it while i was welding it up. it tucks up pretty good for a 3in setup. I dont have any of it on the car at the moment tho
Trending Topics
#10
i have done quite a few x-pipe setups with the summit and jegs uni kits. i always tuck the mufflers in as close as i can to the drive shaft and torque arm and suck them way up to the body. the above looks good but not as far in as i like and you loose ground clearence. on all the ones i have done the lowest part is always the collectors.
it takes me about 3 hrs to do a setup with no lift. a lift would save a ton of time.
it takes me about 3 hrs to do a setup with no lift. a lift would save a ton of time.
#11
TECH Addict
iTrader: (30)
In the video, I still hadn't had my mufflers moved. They were just hanging too low there. So, I took it back a couple months ago and had it ran like this. Sorry the underside of the car is kinda dirty. I didn't really have much of a choice of driving it in the snow last week.
#19
TECH Addict
iTrader: (30)
Man, that's pretty high. I had them do my LT header install, fab the x, bought piping from them to take out the back, and they also put my plugs and wires on. It only cost me $300. It would've only been $200, but they had too many difficulties taking off my old Edelbrock TES shorties. Then, I also didn't have much ground clearance. So, I had to take it back and have them move the mufflers and bend all new piping after the x, and they also painted it all black. But, that was still only another $120.